Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Australia · rugged

Rugged Mobile Phone in Australia

A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. This page explains what to look for in a rugged mobile phone for Australia, and where the IS-04Z1 stands against that list today.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Australia, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicrugged
DeviceMobile Phone
RouteSpecification
WhereAustralia

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Australia: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.

At a glance · rugged

Checklist: rugged mobile phone for Australia

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Ingress protectionIP65 to IP68 sealingIP68 design
Drop and shockA stated drop height onto concreteSpecification on request
Explosion protectionA separate certificate and markingIn progress; not issued
Where it appliesAustralia: Karratha and the Burrup Peninsula, Onslow, Western Australia, DarwinClassified by the site operator
Product · Australia

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Australia

Where an Ex phone is used in Australia

Operators and classified areas drawn from the SAMS Australia market guide.

Operators, EPCs and contractors

Woodside Energy
North West Shelf, Pluto LNG and the Karratha Gas Plant
Chevron Australia
Gorgon on Barrow Island and Wheatstone at Onslow
INPEX
Ichthys LNG at Darwin and Browse Basin facilities
Shell Australia
Prelude FLNG and QCLNG on Curtis Island
Santos
GLNG at Gladstone and the Moomba gas plant
ConocoPhillips and Origin Energy
Australia Pacific LNG and Surat Basin coal seam gas

Industrial areas and sites

Karratha and the Burrup Peninsula
Karratha Gas Plant, Pluto LNG and offshore support
Onslow, Western Australia
Wheatstone LNG and the Ashburton North estate
Darwin
Ichthys LNG, marine supply base and harbour work
Gladstone and Curtis Island
Three LNG trains plus alumina and coal wharves
Bowen Basin, Queensland
Coal mining, methane drainage and handling plants
Pilbara, Western Australia
Iron ore mines, workshops and bulk fuel handling
Field notes · Australia

More about Australia that matters for portable equipment

Australia: rules and approvals

An IECEx certificate for an assembly of several items is not automatically accepted unless it is validated against the current AS/NZS 60079.14 or the assembly is independently inspected.

Australia: rules and approvals

Australia works on the IECEx scheme and the AS/NZS 60079 series, and the national ANZEx scheme is harmonised with IECEx, so IECEx-certified equipment can be used almost without separate national testing.

Australia: rules and approvals

The Australian Communications and Media Authority regulates the supply of radiocommunications equipment and made rule changes in 2023 to simplify and streamline that regulation.

Australia: rules and approvals

An ATEX marking alone is not automatically accepted, because ATEX is an EU directive that allows self-declaration for some categories, and such equipment usually needs a conformity assessment.

The term · rugged

What “rugged” means for a smartphone

A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.

The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.

In Australia. Pilbara summers push site ambients past 45 degrees, and a haul-road vehicle adds drop, shock and vibration. IP68 sealing and a rugged build are designed for gloved use and that duty. Neither IP68 nor ruggedness gives explosion protection, and underground coal is a different regime, Group I, from the Group II surface certification targeted here.

The route · specification

Specifying a rugged mobile phone for Australia

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Australia

Frequently asked questions

Can we buy a rugged mobile phone in Australia today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does a rugged mobile phone in Australia cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

How rugged is the IS-04Z1?

It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.

Which sites in Australia does this cover?

The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Do assemblies of certified items need extra checks in Australia?

Often yes. An IECEx certificate for an assembly is not automatically accepted unless validated against the current AS/NZS 60079.14 or the assembly is independently inspected. Ask the site engineer or an inspection body how a packaged or modular system will be treated before shipping.

Is IECEx certification accepted in Australia?

Yes. Australia accepts a current IECEx or ANZEx Certificate of Conformity under the AS/NZS 60079 series, with the gas group and temperature class matching the classified area. ATEX-only equipment is not automatically accepted. Confirm the installation documentation expected for your site with the operator's electrical engineer.

Can the phone be used in underground coal mines?

No: underground coal equipment is Group I, regulated at state level, which is a different regime from the Group II surface certification the IS-04Z1 targets. Surface coal handling with Zone 21 dust, and gas areas at LNG and processing plants, are the intended duty. Check the classification with the mine operator and regulator.

Enquiry · Australia

Ask about the IS-04Z1 for Australia

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · Australia

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Australia?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.