Suncor: who works there
In fall 2021 Suncor took over operatorship of the Syncrude joint venture and holds a majority stake of 58.74%, making Syncrude a Suncor-run site with its own contractor base.
Suncor is a Calgary-based integrated energy company specialising in synthetic crude from oil sands. It operates oil sands sites near Fort McMurray and holds a majority stake in Syncrude, with refineries in Edmonton, Sarnia, Montreal and Commerce City, Colorado. This page sets out how an IECEx mobile phone supply route to Suncor will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An IECEx mobile phone for Suncor cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Suncor: Oil sands extraction and upgrading, Refinery process units, Fuel terminals | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Where it operates and the kinds of classified area a handset would meet there.
Prospective suppliers complete an intake form on Suncor's website; if capabilities match its needs they may be contacted for registration and pre-qualification, and high-volume goods suppliers may be asked to transact on SAP Ariba Network. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
In fall 2021 Suncor took over operatorship of the Syncrude joint venture and holds a majority stake of 58.74%, making Syncrude a Suncor-run site with its own contractor base.
Suncor was formed in 1979 when Sun Oil merged its Canadian refining, retail and conventional oil businesses with Great Canadian Oil Sands, whose plant began production in 1967 as the first commercial Athabasca oil sands development.
Upstream work covers Western Canada, Colorado and offshore eastern Canada, with international offshore developments in the North Sea, so equipment may need to meet different national regimes.
Suncor operates refineries in Edmonton, Sarnia, Montreal and Commerce City in Colorado, supplying industrial, retail and commercial customers, so hazardous areas span several provinces and one US state.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Suncor. Suncor's sites range from oil sands near Fort McMurray to refineries in Edmonton, Sarnia and Montreal, with contractors who may move between countries. IECEx documents give such teams a certificate of conformity and schedule of conditions that can be compared with local requirements. The IS-04Z1 is designed for IECEx, which is still in progress.
Nothing can be bought for Suncor today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Prospective suppliers complete an intake form on Suncor's website; if capabilities match its needs they may be contacted for registration and pre-qualification, and high-volume goods suppliers may be asked to transact on SAP Ariba Network.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Syncrude is a joint venture that Suncor now operates, and it keeps its own site procedures, contractor induction and permit systems. Treat it as a separate approval, and confirm with Syncrude's safety and procurement teams which certifications and trials they require.
Quebec commonly expects French-language workplace documents, and each province has its own electrical safety authority. Confirm with the Montreal or Sarnia site which labelling, language and certification marks are accepted before supplying portable devices.
Prospective suppliers complete an intake form on Suncor's website, and may be contacted for registration and pre-qualification. High-volume goods suppliers may be asked to use SAP Ariba Network. Check the current process with Suncor. The IS-04Z1 is not yet certified, so no supply route is open.
Other guides for Suncor, other places in Canada, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.