Bapco: projects and investment
The modernisation programme will replace some of the oldest and least efficient refinery units and also needs changes at the Sitra tank farm, Sitra wharf and the transfer pipelines.
The Bahrain Petroleum Company was founded in 1929, discovered oil in 1932 and built Bahrain's first refinery in 1936. Today Bapco Energies is Bahrain's energy group, with operating companies for refining, upstream, gas, fuel retail, aviation fuelling and gasoline blending. Buyers searching for an IECEx mobile phone supplier for Bapco can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An IECEx mobile phone for Bapco cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Bapco: Gas handling, Onshore oil production, Refinery process units | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Bahrain. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main sites and the hazardous-area types a portable device is likely to meet at this organisation.
Bapco Energies' website carries a Vendors & Suppliers page under its Our Responsibility section; confirm current registration steps with its procurement team. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
The modernisation programme will replace some of the oldest and least efficient refinery units and also needs changes at the Sitra tank farm, Sitra wharf and the transfer pipelines.
Bahrain's radio equipment conformity requirements follow the EU radio equipment directive, certificates are valid for a limited period, currently three years, and approved products must be labelled.
Bapco Refining owns and operates the 267,000 barrel a day refinery, while Bapco Energies provides central HR, finance, audit, risk, IT and commercial support, so supplier questions may involve both entities.
Bahrain's November 2020 gas strategy calls for a national gas grid and pipelines to neighbouring Gulf states, and Bapco Energies has also commissioned a study on a hydrogen economy.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Bapco. Bapco's refinery programme draws international EPCs and contractors, many of which already work with IECEx documentation. A certificate of conformity and its schedule of conditions give them and Bapco reviewers the same reference for marking and limits. The IS-04Z1 is designed for IECEx, which is still in progress, and no certificate has been issued.
Supply of the IS-04Z1 to Bapco starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Bapco Energies' website carries a Vendors & Suppliers page under its Our Responsibility section; confirm current registration steps with its procurement team.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Radio equipment in Bahrain is normally approved against EU-style conformity requirements, with approved products labelled and certificates valid for a limited time, currently three years. Confirm the current rules with the telecommunications authority or your local importer, then ask Bapco about site device policy.
Both may be involved. Bapco Refining owns and operates the refinery, while Bapco Energies provides central support such as HR, finance, risk and commercial services. The company's website carries a vendors and suppliers page, so confirm the current registration route with procurement.
Only if its marking matches the area classification, which the operator sets. Fuel loading areas often involve IIA or IIB, but the documents decide. The IS-04Z1 target is II 2 G Ex ib IIC T4, not yet certified. Confirm requirements with Bapco Energies' procurement and HSE teams.
Related guides for Bapco and for Bahrain.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.