South Africa: industry on the ground
South Africa is the world's largest producer of chrome, manganese, platinum and vanadium and the third-largest coal exporter, so mining is a major source of hazardous-area work.
A Zone 1 / Zone 21 smartphone for crews at the Secunda and Sasolburg complexes, the Natref and Cape Town refineries, Mossel Bay, the fuel terminals and the surface plants of South African mining. This page sets out how an IECEx cell phone supply route to South Africa will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An IECEx cell phone for South Africa cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | South Africa: Durban, Richards Bay, Secunda, Mpumalanga | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in South Africa. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS South Africa market guide covers.
South Africa is the world's largest producer of chrome, manganese, platinum and vanadium and the third-largest coal exporter, so mining is a major source of hazardous-area work.
The code references a family of SANS standards, including SANS 10086 on installation, inspection and maintenance of equipment in explosive atmospheres, SANS 1489 on connectors and SANS 1515 on gas measuring equipment for mines.
ICASA, based in Centurion, sets radio type approval, relying on EU test reports for spectrum, EMC and electrical safety, and a conformity label must be affixed to the equipment and the packaging.
South Africa has a National Code of Practice for Electrical Machinery in Hazardous Locations under the Occupational Health and Safety Act 1993, with a section on regulatory requirements for explosion-protected apparatus.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In South Africa. IECEx is the foundation for South Africa: the IS-04Z1 IECEx programme is in progress, and the South African Ex certificate is planned to follow it. For international contractors visiting Secunda or Sasolburg, a certificate of conformity with its schedule of conditions would be the reference document, read alongside the local approval once available.
There is no stock to order for South Africa yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
The market guide for South Africa covers Secunda, Mpumalanga, Sasolburg, Free State, Milnerton, Cape Town, Mossel Bay, Western Cape, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
ICASA sets radio type approval, and it is described as relying on EU test reports covering spectrum use, EMC and electrical safety, with a conformity label on the equipment and packaging. SABS and NRCS handle some electrical-safety certificates separately. Confirm the route for your device with ICASA or an agent.
Conditions vary from hot, dusty surface sites to deep underground workings with heat and humidity. Check ingress protection, operating temperature range and battery life, and confirm site rules on device approval and gas detection with the mine or plant operator.
IP68 sealing and a rugged build are aimed at hot summers, cold winter mornings and dusty conditions. The approved ambient range will be stated on the certificate, which is in progress. Check that range against the coldest morning shift at your site before ordering.
Other guides for South Africa, other places in South Africa, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.