South Africa: industry on the ground
Secunda CTL, owned by Sasol, is the world's largest coal liquefaction plant, with capacity of 160,000 barrels a day from units built in 1980 and 1984, so synthetic fuel gas and liquids handling is extensive.
A Zone 1 / Zone 21 smartphone for crews at the Secunda and Sasolburg complexes, the Natref and Cape Town refineries, Mossel Bay, the fuel terminals and the surface plants of South African mining. This page explains what to look for in an Ex-proof mobile phone for South Africa, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for South Africa: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | South Africa: Secunda, Mpumalanga, Sasolburg, Free State, Milnerton, Cape Town | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in South Africa. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS South Africa market guide.
Secunda CTL, owned by Sasol, is the world's largest coal liquefaction plant, with capacity of 160,000 barrels a day from units built in 1980 and 1984, so synthetic fuel gas and liquids handling is extensive.
Mining areas range from the Witwatersrand gold fields to Limpopo platinum mines such as Two Rivers at Steelpoort, so remote sites and deep underground workings are both common.
Electrical safety for some products is handled through SABS certificates of conformity and an NRCS letter of authority, which are separate from ICASA's radio approval.
The 1886 discovery on the Witwatersrand started the gold rush that built Johannesburg's mining industry, and the country is still fifth in world gold production by one account.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In South Africa. A marking check here would read Ex ib IIC T4 against hydrogen-rich synthetic fuel and refining streams that put some areas into gas group IIC, then check IIA and IIB are also covered. For coal handling and conveying at mines and power stations, Zone 21 dust evidence is read beside the gas marking.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for South Africa covers Secunda, Mpumalanga, Sasolburg, Free State, Milnerton, Cape Town, Mossel Bay, Western Cape, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Underground mines typically use Group I classification, with methane and coal-dust risks, while surface plants use Group II and III. SANS standards such as SANS 1515 cover mine gas-measuring equipment. Ask the mine or plant engineer which group and protection level the area drawing specifies before ordering.
Yes. The National Code of Practice for Electrical Machinery in Hazardous Locations sits under the Occupational Health and Safety Act 1993 and refers to SANS standards. Mines also have their own regulations and standards, so confirm which rules apply with the site's engineering and compliance team.
No. Underground mining is equipment Group I, which is outside the scope of this device. The IS-04Z1 targets surface areas such as coal handling plants and process units using Zone 1 and Zone 21. Confirm the area and equipment group with the mine's safety officer.
More on South Africa, and on other places in South Africa.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.