Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Surabaya · hazardous area

Hazardous Area Smartphone in Surabaya

Surabaya is the capital of East Java and home to Tanjung Perak, Indonesia's second-largest port. The city hosts a large shipyard and several naval schools, and in the Dutch colonial era hosted the most extensive naval base in the colony, so marine and ship-repair work is a core local activity. This page explains what to look for in a hazardous area smartphone for Surabaya and the Gresik industrial area, and where the IS-04Z1 stands against that list today.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Surabaya, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceSmartphone
RouteSpecification
WhereSurabaya

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Surabaya and the Gresik industrial area: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · hazardous area

Checklist: hazardous area smartphone for Surabaya and the Gresik industrial area

Checks a reviewer should make, with the IS-04Z1 position
CheckWhat to look forIS-04Z1 today
Zone0, 1 or 2 for gas; 20, 21 or 22 for dustDesigned for Zone 1 and Zone 21
Gas groupIIA, IIB or IICIIC (target)
Area drawingThe operator's own classification drawingDecided by the site operator
Where it appliesSurabaya and the Gresik industrial area: Port fuel and chemical handling, Fertiliser and chemical plants, Cement plant dust areasClassified by the site operator
Product · Surabaya

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Surabaya. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The site · Surabaya and the Gresik industrial area

Working in Surabaya and the Gresik industrial area: operators and classified areas

The companies on site and the hazardous-area types a handset is likely to meet there.

Operators and companies on site

  • PT Pelindo
  • PT Petrokimia Gresik
  • Semen Gresik
  • PT SIER (Surabaya Industrial Estate Rungkut)

Classified areas to expect

  • Port fuel and chemical handling
  • Fertiliser and chemical plants
  • Cement plant dust areas
  • Industrial estate chemical plants
Local conditions · Surabaya and the Gresik industrial area

What Surabaya and the Gresik industrial area means for portable equipment

Industrial estates

SIER was founded in 1974 and covers about 245 hectares with around 300 companies; the JIIPE estate and port in Gresik is a further 3,000-hectare development by Pelindo and AKR.

Gresik

Gresik lies about 25 kilometres north-west of Surabaya, and its two largest factories are Semen Gresik and Petrokimia Gresik.

Field notes · Surabaya and the Gresik industrial area

More about Surabaya and the Gresik industrial area that matters for portable equipment

Surabaya and the Gresik industrial area: geography and layout

Satellite cities of Mojokerto, Gresik, Sidoarjo, Bangkalan and Lamongan form the wider metropolitan area, which is where much heavier industry and port-side plants are found around the city.

Surabaya and the Gresik industrial area: logistics and access

The Port of Tanjung Perak in north Surabaya is Indonesia's second-busiest seaport, on a site where a modern port facility was first built in 1910, giving contractors a major sea gateway to eastern Indonesia.

Surabaya and the Gresik industrial area: geography and layout

Surabaya is the capital of East Java and Indonesia's second-largest city, on the Madura Strait, and its metropolitan area of about 6,309 sq km has an estimated 10.08 million people.

Surabaya and the Gresik industrial area: climate and equipment wear

Surabaya has a tropical wet and dry climate with a wet season from October to May, steady average highs near 31 degrees Celsius and lows near 23 degrees all year.

The term · hazardous area

What “hazardous area” means for a smartphone

A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.

No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.

In Surabaya and the Gresik industrial area. Classified areas span port fuel and chemical handling, fertiliser and chemical plants, cement plant dust areas and chemical plants in the industrial estate. Each plant or terminal operator classifies its own areas, not SAMS. Ask each for its drawings.

The route · specification

Specifying a hazardous area smartphone for Surabaya

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Surabaya

Frequently asked questions

Can we buy a hazardous area smartphone in Surabaya today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does a hazardous area smartphone in Surabaya cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Which hazardous areas is the IS-04Z1 designed for?

Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.

Which areas at Surabaya and the Gresik industrial area would use it?

Likely candidates are port fuel and chemical handling, fertiliser and chemical plants, cement plant dust areas, industrial estate chemical plants. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

How do I move equipment between Surabaya and Madura or other East Java sites?

The Suramadu Bridge links Surabaya and Madura by road, and Tanjung Perak serves sea freight to eastern Indonesia. Allow time for customs clearance and for any site gate checks on electronic devices at plants and terminals.

Why is Surabaya a useful base for marine and shipyard work?

It has Indonesia's second-busiest seaport, a large shipyard and naval facilities, plus freight forwarders and customs brokers. Marine work typically involves tank entry and hot work, so confirm each yard's permit rules for portable electronic devices.

Can one handset serve both chemical plants and cement works around Surabaya?

Not necessarily. Chemical and fuel areas are gas hazards, while cement works are dust areas, and each needs a suitable marking. The IS-04Z1 target marking covers gas only. Check each area's classification with the operator.

Enquiry · Surabaya and the Gresik industrial area

Ask about the IS-04Z1 for Surabaya and the Gresik industrial area, Indonesia

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · Surabaya and the Gresik industrial area

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Surabaya?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.