Gul yard
ST Engineering acquired the site and assets of the Gul yard formerly run by Keppel FELS in 2023: about 141,000 square metres, with three floating docks.
Keppel's offshore and marine yards in Singapore are now part of Seatrium, formed in 2023 by the merger of Sembcorp Marine and Keppel Offshore & Marine. Repair and upgrade scope at the Singapore yards covers gas carriers (LNG and LPG), floating production units, jack-ups and semi-submersibles, and jumboisation or dejumboisation, each with different tank and gas-freeing routines. This page explains what to look for in a hazardous area smartphone for Keppel Shipyard (now Seatrium yards), Singapore, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Keppel Shipyard (now Seatrium yards), Singapore: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Keppel Shipyard (now Seatrium yards), Singapore: Vessel tank and cargo spaces, Offshore unit conversion, Paint and solvent areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Keppel Shipyard. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
ST Engineering acquired the site and assets of the Gul yard formerly run by Keppel FELS in 2023: about 141,000 square metres, with three floating docks.
Seatrium lists Singapore yards at Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard, with headquarters at 80 Tuas South Boulevard.
Keppel privatised its offshore and marine business in 2001, and in 2002 combined Keppel Shipyard with Keppel FELS and Keppel Singmarine to form the Keppel Offshore and Marine group.
Seatrium, formed in 2023, groups its work into oil and gas newbuilds and conversions, renewables and new energies, specialised shipbuilding, and repairs and upgrades.
Singapore has an equatorial climate with steady heat, high humidity and frequent afternoon rain, so outdoor yard work exposes handheld equipment to moisture and sun throughout the year.
Seatrium's Singapore yards include Admiralty, Benoi, Pioneer, Tuas and Tuas Boulevard, plus the offshore-focused Crescent and Pandan yards, so contractors may work at several sites in one project.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Keppel Shipyard (now Seatrium yards), Singapore. Classified areas at the yards include vessel tank and cargo spaces, offshore unit and FPSO conversion, paint and solvent areas and dry dock work. They change with the job, and permits and gas-free certification are handled per vessel. The yard classifies, not SAMS, so ask the yard safety department.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Likely candidates are vessel tank and cargo spaces, offshore unit conversion, paint and solvent areas, dry dock work. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Conversion projects involve large process and tank systems that become classified areas when commissioned, while repair work is more tank-by-tank and short term. Expect tighter control of electronics on conversion hulls close to hydrocarbon systems. The vessel owner and yard HSE team set the rules for each project.
Keppel's offshore and marine yards are now part of Seatrium, formed in 2023 from Sembcorp Marine and Keppel Offshore and Marine. Former Keppel yard sites in Singapore are now listed under Seatrium, so use that name when registering for contractor access or supplier approval.
No. Seatrium was formed in 2023 and Keppel's yards now operate under it, and the Gul yard was sold to ST Engineering. Use current names when contacting yards. Details of individual Seatrium yards were not verified, so ask the company which yard serves your project.
More on Keppel Shipyard, and on other places in Singapore.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.