Belgium: infrastructure
Nuclear power typically supplies 50-60% of domestic electricity, and in 2023 the lives of Doel 4 and Tihange 3 were extended to 2035, so long-running plant maintenance continues alongside the gas network.
Belgium · hazardous area
Hazardous Area Smartphone in Belgium
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. If you are specifying a hazardous area smartphone for Belgium, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceSmartphone
RouteSpecification
WhereBelgium
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Belgium: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
At a glance · hazardous area
Checklist: hazardous area smartphone for Belgium
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Belgium: Antwerp right bank, Antwerp left bank, Zeebrugge | Classified by the site operator |
Product · Belgium
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Belgium
Hazardous-area industry in Belgium
The main operators, industrial areas and sites that the SAMS Belgium market guide covers.
Operators, EPCs and contractors
- BASF Antwerpen
- Second largest BASF site in the world, on the right bank.
- TotalEnergies
- Antwerp refining and petrochemical platform, its largest integrated site in Europe.
- ExxonMobil
- Antwerp refinery, coker and lubricants production on the Scheldt.
- INEOS
- Project ONE ethane cracker under construction on the left bank.
- Covestro
- Polyurethane and polycarbonate production inside the Antwerp cluster.
- Borealis
- Polyolefin production at Kallo and Beringen.
Industrial areas and sites
- Antwerp right bank
- The Scheldelaan chemical belt, from BASF to the refineries.
- Antwerp left bank
- Kallo and Doel, with crackers, polymers and Project ONE.
- Zeebrugge
- LNG import terminal, jetties and the gas interconnection point.
- Ghent canal zone
- North Sea Port industry along the canal to Terneuzen.
- Feluy
- Hainaut petrochemical platform and polymer production.
- Jemeppe-sur-Sambre
- Chemical site in the Sambre valley near Namur.
Field notes · Belgium
More about Belgium that matters for portable equipment
Belgium: logistics and access
Belgium imports raw materials and semi-finished goods and re-exports them after processing, with the Port of Antwerp the most notable of its ports, canals, railways and highways.
Belgium: infrastructure
After Groningen gas supply fell, Belgium converted affected customers from low-calorific L-gas to high-calorific H-gas, a programme that began in 2018 and was completed by the end of summer 2024.
Belgium: rules and approvals
Under ATEX, equipment in use before July 2003 can remain in use indefinitely provided a risk assessment shows it is safe, which matters when mixing older and newer devices at long-established plants.
The term · hazardous area
What “hazardous area” means for a smartphone
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Belgium. Almost everything classified in Belgium sits inside the Port of Antwerp-Bruges, with LNG import at Zeebrugge, the Ghent canal zone and Walloon platforms at Feluy and Jemeppe-sur-Sambre. Solvent and powder areas can sit inside one fence line. The operators and Seveso inspectors, not SAMS, decide the classification of each area.
The route · specification
Specifying a hazardous area smartphone for Belgium
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Check on the paper
- Marking
- Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
- Certificate and schedule
- A certificate number, issuing body and the schedule of conditions, not a brochure claim.
- Standards edition
- The IEC 60079 or national standard edition the certificate was issued against.
Check for the IS-04Z1
- Marking target
- II 2 G Ex ib IIC T4: a target, not yet a certificate.
- Certificate status
- IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
- Operator approval
- Separate from the certificate and handled with the site operator.
Questions · Belgium
Frequently asked questions
Can we buy a hazardous area smartphone in Belgium today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does a hazardous area smartphone in Belgium cost?
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Which hazardous areas is the IS-04Z1 designed for?
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Which sites in Belgium does this cover?
The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.
Is intrinsically safe the same as explosion proof?
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Can I use older Ex equipment alongside new devices in Belgium?
ATEX allows equipment in use before July 2003 to remain in service if a risk assessment shows it is safe. New purchases need to meet the current Directive. Keep the operator's risk assessment on file and ask whether it has additional internal rules for handheld devices.
Where in Belgium is chemical hazardous-area work concentrated?
The Antwerp port area and Flanders are the best-known concentration, with further industry along the Sillon industriel through Liège and Charleroi. Details of individual plants and zones are held by each operator, so request their layout drawings when planning.
Which language must the instructions be in?
Belgian rules expect information that reaches a worker to be in the language of the region where the work happens: Dutch in Flanders, French in Wallonia, and both in Brussels. The manual, safe-use instructions and declaration of conformity are planned in Dutch and French. Certification is still in progress. Check the wording with your site safety adviser.
Related guides
Keep exploring
Other guides for Belgium, other places in Belgium, and the pages behind them.
Industrial Mobile Phone Supplier in BelgiumSame place, different guide
IECEx Mobile Phone in BelgiumSame place, different guide
Intrinsically Safe Mobile Phone Distributor in BelgiumSame place, different guide
Explosion-Proof Mobile Phone Supplier in BelgiumSame place, different guide
Rugged Mobile Phone Supplier in BelgiumSame place, different guide
ATEX and IECEx Mobile Phone Distributor in BelgiumSame place, different guide
Belgium market guideCertification route and regulators
All guides for BelgiumEvery route we cover
Certification statusWhat is in progress
Enquiry · Belgium
Ask about the IS-04Z1 for Belgium
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Belgium
Launching Q4 2026
Planning for Belgium?
Name the site and the operator and we will send what is available before launch.