Finland: background
Neste built Finland's first refinery at Naantali in 1957 and the Porvoo refinery at Sköldvik (Kilpilahti) in 1965, so Naantali and Porvoo are the traditional centres of refining.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for the refinery and polymer plants at Kilpilahti, the metal and chemical parks on the Bothnian coast and the mill and mine sites where a winter round is measured in kilometres. About 2.8 million Finns rely on district heating, so combined heat and power plants and fuel handling sites exist in nearly every town. A hazardous area smartphone distributor in Finland would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Finland has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Finland: Kokkola, Harjavalta, Sotkamo | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Finland. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Finland market guide.
Neste built Finland's first refinery at Naantali in 1957 and the Porvoo refinery at Sköldvik (Kilpilahti) in 1965, so Naantali and Porvoo are the traditional centres of refining.
Finland lacks domestic fossil energy and imports substantial petroleum and natural gas, so refining, fuel terminals and gas-supply sites are mostly import-led rather than field-based.
The industrial sector accounted for 53% of total final energy consumption in 2021, well above the IEA average, so process industry sites strongly shape the demand for classified-area equipment.
Bioenergy and waste make up 33.6% of total energy supply and peat 2.7%, with Finland one of the last countries still burning peat, which brings fuel-dust handling into power and heat plants.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Finland. Finnish classified areas range from the Kilpilahti refinery and cracker to kraft mill recovery boilers, lime kilns and chip piles, plus gas network sites such as the Inkoo terminal. Classification is carried out by the operator, in line with national rules, not by SAMS. The device must then be matched to each zone and dust or gas group.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Finland yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Finland covers Kilpilahti, Porvoo, Naantali, Kokkola, Harjavalta, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Finland.
Finland is an EU member, so ATEX Directive 2014/34/EU applies to equipment placed on the market and employers zone workplaces under Directive 1999/92/EC. Operators usually also apply their own permit and device registration processes. Ask the site safety office for its current list.
Neste built refineries at Naantali in 1957 and at Porvoo, in the Kilpilahti area, in 1965. Fuel terminals and gas-supply sites serve the rest of the country. Individual site rules and current operations should be confirmed with the operator before a visit.
The IS-04Z1 is designed for industrial duty with IP68 sealing, but cold performance of any lithium battery needs testing. Ask for the datasheet's operating temperature range and trial a unit on an actual winter round. Site rules on charging and storage in safe areas still apply.
More on Finland, and on other places in Finland.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.