Czech Republic: infrastructure
The Gazela pipeline connects Czech gas supply through Germany at Brandov or Rozvadov and through Slovakia at Lanžhot, so compressor and metering stations sit near the borders.
Czech Republic · hazardous area
Hazardous Area Cell Phone Supplier in Czech Republic
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for Czech refineries, chemical plants, tank farms and coke ovens rather than for a catalogue. Buyers searching for a hazardous area cell phone supplier for Czech Republic can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceCell Phone
RouteSupply
WhereCzech Republic
Short answer. A hazardous area cell phone for Czech Republic cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · hazardous area
Checklist: hazardous area cell phone for Czech Republic
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Czech Republic: Pardubice, Lovosice, Litvínov and Záluží | Classified by the site operator |
Product · Czech Republic
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Czech Republic. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Czech Republic
Where an Ex phone is used in Czech Republic
Operators and classified areas drawn from the SAMS Czech Republic market guide.
Operators, EPCs and contractors
- Orlen Unipetrol
- Litvínov and Kralupy refineries and the Záluží petrochemical complex.
- Spolana
- PVC production at Neratovice.
- Synthos Kralupy
- Styrene and synthetic rubber production beside the Kralupy refinery.
- Deza
- Coal tar and crude benzol processing at Valašské Meziříčí.
- Paramo
- Bitumen and lubricant production at Pardubice.
- Lovochemie
- Nitrogen fertiliser production at Lovosice on the Elbe.
Industrial areas and sites
- Litvínov and Záluží
- Refinery, steam cracker and downstream polymer plants.
- Kralupy nad Vltavou
- Conversion refinery with a fluid catalytic cracker.
- Neratovice
- Chlor-alkali and PVC chemistry on the Elbe.
- Valašské Meziříčí
- Tar and benzol processing in the Zlín region.
- Pardubice
- Refining by-products, bitumen and lubricant blending.
- Lovosice
- Fertiliser production and river and rail loading.
Field notes · Czech Republic
More about Czech Republic that matters for portable equipment
Czech Republic: infrastructure
In 2022 electricity production was 78.8 TWh, of which 53.6% came from fossil fuels, mostly lignite, and 40.95% from nuclear, so coal-handling plants and power stations are typical dust and gas sites.
Czech Republic: rules and approvals
ATEX equipment is split into Group I for mining and Group II for surface industries, which matters in a country with coal mining as well as refining and chemicals.
Czech Republic: industry on the ground
Gas use was 9.4 billion cubic metres in 2021 and 7.1 billion in 2023, so gas distribution and industrial gas burners remain widespread across Czech industry.
The term · hazardous area
What “hazardous area” means for a smartphone
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Czech Republic. Czech classified areas are concentrated and well mapped: Litvínov and Záluží, Kralupy nad Vltavou, Neratovice, Lovosice, Pardubice, tank farms at Nelahozeves, coking plants at Ostrava and Třinec, and gas storage in South Moravia. Operators classify these areas, not SAMS, and vapour and powder areas often sit a few steps apart.
The route · supply
Sourcing the IS-04Z1 for Czech Republic
Nothing can be bought for Czech Republic today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
- 01
Request the datasheet
The technical specification, marking target and conditions of use, sent by email.
- 02
Ask for the certification schedule
Which certificates are in progress, in what order, and what is still to be confirmed.
- 03
Evaluate in a safe area
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
- 04
Register for launch
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Questions · Czech Republic
Frequently asked questions
Can we buy a hazardous area cell phone in Czech Republic today?
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
What does a hazardous area cell phone in Czech Republic cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Which hazardous areas is the IS-04Z1 designed for?
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Which sites in Czech Republic does this cover?
The market guide for Czech Republic covers Litvínov and Záluží, Kralupy nad Vltavou, Neratovice, Valašské Meziříčí, among others. Site-level pages are linked below.
How will SAMS supply Czech Republic?
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Do Czech mines need different Ex equipment from refineries?
Yes. ATEX separates Group I equipment for mining from Group II for surface industries, and methane and coal dust conditions underground differ from refinery gas and vapour. Check the Group marking on any device against the area and the mine operator's own approval process.
How do pipeline terminals in the Czech Republic affect device planning?
Crude arrives by pipeline from Germany and Italy, with storage at depots such as Nelahozeves, so many classified areas are at pumping and storage sites rather than ports. Terminal operators run their own induction and device registration, so schedule approvals early for shutdown work.
Must the instructions be in Czech?
Czech law expects the instructions in Czech, so the manual, safe-use guidance and declaration of conformity are planned in Czech alongside English, with a Czech interface on Android 16. That is planned into the launch rather than translated afterwards. Certification is in progress. Check requirements with your safety officer.
Related guides
Keep exploring
Related guides for Czech Republic and for Czech Republic.
Explosion-Proof Mobile Phone in Czech RepublicSame place, different guide
ATEX and IECEx Mobile Phone in Czech RepublicSame place, different guide
Industrial Mobile Phone Supplier in Czech RepublicSame place, different guide
Ex-Proof Mobile Phone Supplier in Czech RepublicSame place, different guide
IECEx Mobile Phone Supplier in Czech RepublicSame place, different guide
Rugged Mobile Phone in Czech RepublicSame place, different guide
Czech Republic market guideCertification route and regulators
All guides for Czech RepublicEvery route we cover
Certification statusWhat is in progress
Enquiry · Czech Republic
Ask about the IS-04Z1 for Czech Republic
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Czech Republic
Launching Q4 2026
Planning for Czech Republic?
Name the site and the operator and we will send what is available before launch.