Mexico: rules and approvals
Telecom and wireless products follow the PEC conformity assessment procedure, which results in a Certificate of Homologation, so older IFT references in supplier paperwork may be out of date.
Mexico · hazardous area
Hazardous Area Cell Phone Distributor in Mexico
The IS-04Z1 is an Ex mobile phone for people working inside classified areas at Mexican refineries, offshore platforms, petrochemical plants and fuel terminals. The offshore Cantarell field was discovered in 1976, started production in 1979 and peaked in 2004, so ageing offshore infrastructure is a feature of Mexican upstream work. Distribution partners for Mexico are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceCell Phone
RouteDistribution
WhereMexico
Short answer. Mexico has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
At a glance · hazardous area
Checklist: hazardous area cell phone for Mexico
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Mexico: Ciudad del Carmen, Coatzacoalcos and Minatitlán, Altamira, Tamaulipas | Classified by the site operator |
Product · Mexico
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Mexico. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Mexico
Where this applies in Mexico
The classified areas, operators and sites below are the ones covered in the SAMS Mexico market guide.
Operators, EPCs and contractors
- Pemex
- The national refining system, Campeche production, pipelines and terminals
- CFE
- Power stations and their fuel handling and storage areas
- Braskem Idesa
- The Etileno XXI polyethylene complex in southern Veracruz
- Alpek and Indelpro
- Polyester and polypropylene production on the Gulf coast
- Cydsa
- Chemicals and underground hydrocarbon storage in Veracruz
- Vopak
- Chemical and petrochemical tank terminals at Altamira and Coatzacoalcos
Industrial areas and sites
- Dos Bocas, Tabasco
- The Olmeca refinery, still ramping up through 2026
- Bay of Campeche
- Ku-Maloob-Zaap, Cantarell and the Ayatsil development
- Ciudad del Carmen
- The onshore base supporting the offshore fleet
- Coatzacoalcos and Minatitlán
- Refining and petrochemicals along the Isthmus corridor
- Altamira, Tamaulipas
- The leading port for petrochemical fluids in Mexico
- Tula, Hidalgo
- Refining and power generation on the central plateau
Field notes · Mexico
More about Mexico that matters for portable equipment
Mexico: rules and approvals
Applicants are described as needing in-country testing in Mexico or at a laboratory recognised under a mutual recognition agreement, plus a local representative or importer.
Mexico: background
Pemex was formed by decree on 7 June 1938 after the nationalisation of the private oil companies, and it is still state-owned and run by the government.
Mexico: rules and approvals
Mexico has two approval schemes, telecom homologation and NOM certification, and neither is mandatory for every product; which applies depends on what is being sold.
The term · hazardous area
What “hazardous area” means for a smartphone
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Mexico. Mexico spreads classified work across the Bay of Campeche and Ciudad del Carmen, the Isthmus corridor, Altamira, Tula, Cadereyta, Salamanca and Salina Cruz. Dust areas, such as coke, sulfur, cement and grain handling, are easy to overlook. Operators classify each area, and ASEA requirements sit above that in hydrocarbons; SAMS does not classify.
The route · distribution
Distributing the IS-04Z1 in Mexico
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Mexico. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Mexico.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Mexico
Frequently asked questions
Can we buy a hazardous area cell phone in Mexico today?
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
What does a hazardous area cell phone in Mexico cost?
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Which hazardous areas is the IS-04Z1 designed for?
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
Which sites in Mexico does this cover?
The market guide for Mexico covers Dos Bocas, Tabasco, Bay of Campeche, Ciudad del Carmen, Coatzacoalcos and Minatitlán, among others. Site-level pages are linked below.
How do I become a SAMS distributor for Mexico?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Mexico.
Do I need both homologation and NOM certification for a phone in Mexico?
Not always. Mexico has telecom homologation and NOM schemes, and which applies depends on the product. Radio products generally need homologation, while some electrical products also need NOM certificates for customs clearance. Confirm both requirements with a Mexican certification body before shipping.
Where does hazardous-area work concentrate in Mexico?
Typically Pemex offshore platforms in the Gulf of Mexico, onshore fields and gas processing plants, refineries such as Tula, and petrochemical complexes on the Gulf coast. Each operator issues its own classification, so request the area drawing and the gas group and temperature class before specifying equipment.
Do Mexican drawings in Clase I División 1 match a Zone 1 device?
They are different systems. Mexican practice follows the American code, so Clase and División is common, while the IS-04Z1 is designed for Zone 1 and Zone 21 and has an NEC 500 route in progress. The mapping is a documentation matter, so confirm acceptance with the unidad de verificación and the plant.
Related guides
Keep exploring
Other guides for Mexico, other places in Mexico, and the pages behind them.
Industrial Mobile Phone in MexicoSame place, different guide
Rugged Mobile Phone Distributor in MexicoSame place, different guide
IECEx Mobile Phone in MexicoSame place, different guide
Explosion-Proof Mobile Phone Distributor in MexicoSame place, different guide
Intrinsically Safe Mobile Phone Supplier in MexicoSame place, different guide
Ex-Proof Mobile Phone Supplier in MexicoSame place, different guide
Mexico market guideCertification route and regulators
All guides for MexicoEvery route we cover
Certification statusWhat is in progress
Enquiry · Mexico
Ask about the IS-04Z1 for Mexico
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Enquiry · Mexico
Launching Q4 2026
Planning for Mexico?
Send the zone and gas group of your site and we will reply with the datasheet and schedule.