Germany: logistics and access
Norway supplied the largest share of both Germany's gas and crude oil imports in 2025, and German LNG terminals accounted for 10.3% of natural gas imports, so LNG import sites are a new classified-area category.
The IS-04Z1 is an eigensicheres Smartphone designed to ATEX 2014/34/EU for Zone 1 and Zone 21, built for the chemical parks, refineries and pharmaceutical plants where most German Ex-Schutz work happens. Manufacturers may self-certify ATEX Category 3 equipment with a technical dossier including a user manual in the local language, while Category 1 and 2 generally need a notified body. A hazardous area cell phone distributor in Germany would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Germany has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Germany: Marl, Frankfurt Höchst, Burghausen | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Germany. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Germany market guide covers.
Norway supplied the largest share of both Germany's gas and crude oil imports in 2025, and German LNG terminals accounted for 10.3% of natural gas imports, so LNG import sites are a new classified-area category.
Germany plans to phase out coal-fired electricity generation by 2038 at the latest and aims for renewables to supply at least 80% of gross electricity consumption by 2030.
Germany imported 96% of its petroleum and 89% of its natural gas in 2025, and imports covered 65.6% of its total energy needs, so ports, pipelines and storage terminals are central.
Domestic hard coal production ended in 2018, so all hard coal is imported, adding port coal-handling and rail-transfer sites to Germany's dust-hazard areas.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Germany. German classified areas include chemical parks, refineries such as Karlsruhe and Schwedt, pharmaceutical plants, and LNG terminals at Wilhelmshaven and Brunsbüttel. The operator sets and documents each zone for gas and for dust. SAMS does not classify any area; the device is designed for Zone 1 and Zone 21.
A distributor for Germany would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Germany covers Ludwigshafen, Leverkusen, Marl, Frankfurt Höchst, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Germany.
German LNG terminals supplied about 10.3% of natural gas imports in 2025, and crude, products and coal arrive through ports and pipelines. Individual terminal locations and rules change, so confirm the current list and each operator's contractor requirements before planning work.
Lignite is mined in North Rhine-Westphalia, Saxony and Brandenburg and burned at nearby power plants, so coal dust, conveyor and bunker areas are typical dust zones. Choose devices with a dust group marking suited to the area classification, and check with the operator.
Acceptance is the decision of the operator and its approved inspection body. ATEX is the usual reference for equipment in the EU, and IECEx papers may support a review. Ask the site's explosion protection officer which evidence they require before ordering.
Related guides for Germany and for Germany.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.