Peru: infrastructure
The 540 kilometre Camisea pipeline crosses the steep Andes to the Pisco terminal in the Paracas National Reservation, passing the Malvinas plant where LPG liquids are separated from the gas.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Peru every shift: copper mine and concentrator operators, Camisea gas-field crews, refinery engineers, and the HSE and telecoms teams who equip them. The Camisea gas project in the Cusco Region started operating in August 2004, in a remote forested part of the Amazon Basin on the Urubamba River with a largely Indigenous population. Distribution partners for Peru are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Peru has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Protection concept | Flameproof (Ex d) or intrinsic safety (Ex i) | Intrinsic safety, level ib |
| Zone suitability | Zone 1 gas and Zone 21 dust | Design target for Zone 1 and 21 |
| Certificate | Number, issuing body and schedule of conditions | In progress; not issued |
| Where it applies | Peru: Cerro Verde, Las Bambas, Camisea | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Peru. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Peru market guide.
The 540 kilometre Camisea pipeline crosses the steep Andes to the Pisco terminal in the Paracas National Reservation, passing the Malvinas plant where LPG liquids are separated from the gas.
A testing partner reports that Peruvian homologation needs no local laboratory tests or local representative, certificates have unlimited validity, and there are no extra labelling requirements.
Type approval for radio equipment in Peru is run by the Ministerio de Transportes y Comunicaciones, MTC, and is based on American FCC standards.
Shell discovered the Camisea fields in 1986 under blocks 38 and 42, a contract signed in 1981 that covered about 20,000 square kilometres of the southern Ucayali Basin.
“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.
The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.
In Peru. At Camisea or Talara people say explosion proof, but the concepts differ. Flameproof Ex d encloses an explosion and suits fixed equipment, while the IS-04Z1 uses intrinsic safety, Ex ib. That fits a handset carried through a gas processing plant or refinery rather than mounted on a pipe, and Zone 21 matters at concentrators.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Peru. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.
The market guide for Peru covers Cuajone / Toquepala, Antamina, Cerro Verde, Las Bambas, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Peru.
MTC, the Ministerio de Transportes y Comunicaciones, runs type approval for radio equipment, and a testing partner reports that it is based on FCC standards with no local laboratory tests, no local representative requirement and no extra label. Confirm current requirements with MTC or a local agent.
Typically at the Camisea wells and plants in the Amazon basin, the Malvinas separation plant, the Pisco terminal, refineries on the coast, and mines with diesel storage, explosives and dust. Each operator issues its own classification, so request the zone drawing and gas or dust group.
The device is designed with an outdoor-readable display and rugged sealing, but ambient and altitude limits are fixed by the certificate, which is not yet issued. Compare the published range with your mine's conditions and confirm with the operator before use at sites above 4,000 metres.
Related guides for Peru and for Peru.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Name the site and the operator and we will send what is available before launch.