The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. Buyers searching for an Ex-proof smartphone supplier for Belgium can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An Ex-proof smartphone for Belgium cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Belgium: Feluy, Jemeppe-sur-Sambre, Antwerp right bank | Classified by the site operator |
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Belgium market guide.
Chemicals, pharmaceuticals, petroleum products, metals and motor vehicle assembly feature among Belgium's industrial base, and chemicals are also a leading export, which means many process plants with flammable solvents and gases.
Fluxys is the main natural gas transmission operator, and gas imports came mainly from the Netherlands and Norway in 2021, so compressor and metering stations are part of the classified-area network.
Dutch-speaking Flanders and French-speaking Wallonia have different industrial histories and languages, and Belgium has a multilingual, well-trained workforce, so Dutch and French documents are often requested.
Industry is concentrated in Flanders in the north, around Brussels, and along the Sillon industriel through Liège and Charleroi, so hazardous-area work is split between a coastal north and an older steel and chemicals south.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Belgium. A marking check on the Scheldelaan or the left bank would focus on Group IIC, because IIC includes hydrogen and steam crackers, industrial gas networks and new capacity make it the sensible assumption. The target is II 2 G Ex ib IIC T4, with Zone 21 dust under the same programme and a stated ambient range.
Supply of the IS-04Z1 to Belgium starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Belgium is an EU member, so ATEX Directive 2014/34/EU applies to equipment placed on its market, and employers zone workplaces under Directive 1999/92/EC. Zone 1 and Zone 2 devices should carry the Ex and CE markings. Confirm the exact accepted categories with each site operator.
Dutch in Flanders, French in Wallonia and sometimes English at international chemical sites. Instructions are typically expected in the user's language for ATEX equipment, so ask the operator which language it expects. Bilingual documentation packs can avoid delays at gate control.
Camera control is why ordinary phones are refused at the gate on Seveso sites. Android 16 with EMM and MDM lets the camera, location services and application list be set centrally, so permissions can be shown during evaluation. Whether a site accepts it still depends on its own rules. Confirm with the operator before taking a unit in.
Other guides for Belgium, other places in Belgium, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.
