Finland: infrastructure
About 2.8 million Finns rely on district heating, so combined heat and power plants and fuel handling sites exist in nearly every town.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for the refinery and polymer plants at Kilpilahti, the metal and chemical parks on the Bothnian coast and the mill and mine sites where a winter round is measured in kilometres. The industrial sector accounted for 53% of total final energy consumption in 2021, well above the IEA average, so process industry sites strongly shape the demand for classified-area equipment. Distribution partners for Finland are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Finland has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Finland: Kokkola, Harjavalta, Sotkamo | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Finland. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Finland market guide covers.
About 2.8 million Finns rely on district heating, so combined heat and power plants and fuel handling sites exist in nearly every town.
Bioenergy and waste make up 33.6% of total energy supply and peat 2.7%, with Finland one of the last countries still burning peat, which brings fuel-dust handling into power and heat plants.
Energy use per capita is the highest in the EU, partly because of energy-intensive industry, a cold climate and long distances, so winter operation of handheld equipment is a normal planning point.
The Finnish Safety and Chemicals Agency, Tukes, monitors safety in technology, chemicals and hazardous materials, with divisions for facilities and mines and for products and equipment, and is Finland's competent authority for REACH, CLP and Seveso III.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Finland. A marking check at a Finnish site would read the gas group, temperature class and equipment category against the area classification. Hydrocarbon and hydrogen service at Kilpilahti may call for a different group than a pulp mill's dust areas. The IS-04Z1 marking target is II 2 G Ex ib IIC T4; it is a target, not a granted marking.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Finland. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Finland covers Kilpilahti, Porvoo, Naantali, Kokkola, Harjavalta, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Finland.
Yes, because fuel dust from wood, biomass and peat is combustible, so dust zones such as Zone 21 and Zone 22 matter alongside gas zones. Choose devices with dust group marking suitable for the site's classification drawings and the operator's own requirements.
Winter temperatures can fall well below the minimum rating of ordinary electronics, and battery capacity drops in the cold. Check the lowest rated ambient temperature on the certificate, glove-friendly touch operation and whether charging must happen indoors outside the classified area.
Gate procedures and contractor rules are set by the operator and the site authority, so requirements vary. A contractor would normally be asked for evidence that a device suits the zones it enters. Check the rules with the site before bringing any device in.
Related guides for Finland and for Finland.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.