Brazil: rules and approvals
An OCP may issue its certificate on the basis of an IECEx test report and quality assessment report if they are equivalent, but only under Model 5, so IECEx work helps without replacing national certification.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas on Brazilian platforms, refineries, petrochemical units, mills and terminals. If you are specifying an Ex-proof cell phone for Brazil, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Brazil: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Brazil: Santos Basin pre-salt, Campos Basin, Duque de Caxias | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Brazil market guide.
An OCP may issue its certificate on the basis of an IECEx test report and quality assessment report if they are equivalent, but only under Model 5, so IECEx work helps without replacing national certification.
Petrobras began processing oil shale in 1953 with its Petrosix technology, and in 2006 its industrial retort could treat 260 tonnes of shale an hour.
ANATEL's CERTIFICA platform requires the local applicant's legal representative to sign a product warranty and technical support declaration, and certification templates need ICP-Brasil digital signatures.
The pre-salt oil fields lie within Brazil's exclusive economic zone and extend along the coast from Espirito Santo to Santa Catarina, with reserves estimated at more than 50 billion barrels.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Brazil. A marking check on a Brazilian jetty, deck or unit would read the temperature class against the drawing, since T4 is the figure usually checked, along with gas group and the INMETRO mark. Heat and salt-laden air at Suape, Santos and Camaçari are common. The marking target is II 2 G Ex ib IIC T4, still in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Brazil covers Santos Basin pre-salt, Campos Basin, Duque de Caxias, Paulínia, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Typically offshore pre-salt platforms and floating units off the south-east coast, onshore refineries and terminals, petrochemical complexes and ethanol and sugar mills. Each operator issues its own area classification, so request the zone drawing, gas or dust group and temperature class before choosing equipment.
Radio equipment needs ANATEL certification through the CERTIFICA platform, using a local legal representative who signs the warranty and technical support declaration, with digital signatures from ICP-Brasil on templates. Requirements change, so confirm current steps with ANATEL or an accredited certification body.
No: certification is compulsory and issued by an OCP accredited by INMETRO, under Portaria INMETRO 115 of 2022. IECEx data normally supports the Brazilian file without replacing it. The IS-04Z1 has no certificate of any kind yet. Check requirements with Petrobras or your contract's equipment specification.
More on Brazil, and on other places in Brazil.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.