New Zealand: infrastructure
Ahuroa Gas Storage Facility is the country's only underground gas storage site, so compressor, wellhead and storage-related classified areas are concentrated in a small number of places.
New Zealand · ATEX and IECEx
ATEX and IECEx Smartphone Supplier in New Zealand
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in New Zealand every shift: Taranaki gas-field operators, methanol and fertiliser plant crews, dairy-processing engineers managing milk-powder dust risk, and the HSE and telecoms teams who equip them. This page sets out how an ATEX and IECEx smartphone supply route to New Zealand will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteSupply
WhereNew Zealand
Short answer. An ATEX and IECEx smartphone for New Zealand cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
At a glance · ATEX and IECEx
Checklist: ATEX and IECEx smartphone for New Zealand
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | New Zealand: Dairy processing sites nationwide, Taranaki, Motunui / Waitara Valley | Classified by the site operator |
Product · New Zealand
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in New Zealand. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · New Zealand
Hazardous-area industry in New Zealand
The main operators, industrial areas and sites that the SAMS New Zealand market guide covers.
Operators, EPCs and contractors
- Methanex
- Methanol production at Motunui, Taranaki; the Waitara Valley plant has been idle since 2021
- Todd Energy
- Upstream gas and condensate production in the Taranaki basin
- OMV New Zealand
- Operator of Maui, Pohokura and other Taranaki offshore and onshore fields
- Ballance Agri-Nutrients
- Urea and ammonia production at Kapuni, Taranaki
- Fonterra
- The world’s largest dairy exporter — milk-powder drying and processing nationwide
- Channel Infrastructure
- Operator of the former Marsden Point refinery, now a fuel import terminal
Industrial areas and sites
- Taranaki
- New Zealand’s principal oil, gas and petrochemical region
- Motunui / Waitara Valley
- Methanex methanol production complexes
- Kapuni
- Gas field and Ballance Agri-Nutrients fertiliser plant
- Marsden Point
- Former refinery, now Channel Infrastructure’s import terminal, Northland
- Dairy processing sites nationwide
- Fonterra and other processors’ milk-powder drying towers and storage
Field notes · New Zealand
More about New Zealand that matters for portable equipment
New Zealand: infrastructure
About 2,600 km of high-pressure gas transmission pipeline runs in the North Island, led by the 307 km Maui pipeline carrying 78% of production; there is no gas transmission in the South Island.
New Zealand: geography and layout
All domestic oil and gas comes from 21 petroleum permits in the Taranaki basin, with Kapuni, Maui, Pohokura and Kupe the most important fields, which concentrates upstream work on the west coast of the North Island.
New Zealand: people and language
Hazardous-area inspections are done by suitably registered inspectors working to AS/NZS 60079.17 and AS/NZS 3000, with a verification dossier and records kept, so documents for any device should be easy to supply.
The term · ATEX and IECEx
What “ATEX and IECEx” means for a smartphone
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In New Zealand. A New Zealand reviewer in Taranaki or a dairy plant would expect clear certificate evidence that can be checked against the site's hazardous area records. The IS-04Z1 is on an IECEx and ATEX programme, with no certificate issued. A dual route helps international contractors and operators, such as OMV New Zealand, who bring global standards to local work.
The route · supply
Sourcing the IS-04Z1 for New Zealand
Supply of the IS-04Z1 to New Zealand starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
- 01
Request the datasheet
The technical specification, marking target and conditions of use, sent by email.
- 02
Ask for the certification schedule
Which certificates are in progress, in what order, and what is still to be confirmed.
- 03
Evaluate in a safe area
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
- 04
Register for launch
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Questions · New Zealand
Frequently asked questions
Can we buy an ATEX and IECEx smartphone in New Zealand today?
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
What does an ATEX and IECEx smartphone in New Zealand cost?
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Is the IS-04Z1 ATEX and IECEx certified?
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Which sites in New Zealand does this cover?
The market guide for New Zealand covers Taranaki, Motunui / Waitara Valley, Kapuni, Marsden Point, among others. Site-level pages are linked below.
How will SAMS supply New Zealand?
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Which standard governs Ex equipment selection in New Zealand?
Electrical equipment for explosive atmospheres is generally selected and inspected to AS/NZS 60079, the local adoption of the IEC 60079 series, alongside AS/NZS 3000 for installations. IECEx certificates are widely accepted as evidence, but confirm the exact requirement with the site operator or your inspector.
What records does a hazardous-area inspection in New Zealand expect for a handheld device?
Inspectors typically look for equipment marking suited to the zone, the certificate or verification dossier, and a record of inspection under AS/NZS 60079.17. Keep the certificate number, marking photo and any manufacturer instructions with the asset register entry.
Will the 4,000 mAh battery last a full shift?
The battery is sized for a working day of plant rounds, but real life depends on use of camera, GNSS and radio. There is no recharge point inside a classified area, so plan to charge in a safe area. Test the device on your own round before relying on it.
Related guides
Keep exploring
More on New Zealand, and on other places in New Zealand.
Industrial Mobile Phone Distributor in New ZealandSame place, different guide
Explosion-Proof Mobile Phone in New ZealandSame place, different guide
Ex-Proof Mobile Phone Distributor in New ZealandSame place, different guide
IECEx Mobile Phone Distributor in New ZealandSame place, different guide
Intrinsically Safe Mobile Phone Distributor in New ZealandSame place, different guide
Rugged Mobile Phone Distributor in New ZealandSame place, different guide
New Zealand market guideCertification route and regulators
All guides for New ZealandEvery route we cover
Certification statusWhat is in progress
Enquiry · New Zealand
Ask about the IS-04Z1 for New Zealand
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Enquiry · New Zealand
Launching Q4 2026
Planning for New Zealand?
Send the zone and gas group of your site and we will reply with the datasheet and schedule.