Seatrium yards
Seatrium's own contact page lists a Pioneer Yard at 50 Gul Road, a Benoi Yard at 15 Benoi Road and a Tuas Yard at 51 Pioneer Sector 1.
Pioneer is a heavily industrial planning area of 12.2 square kilometres in western Singapore, part of the Jurong Industrial Estate. The area was once called Jalan Besi, meaning Metal Road, until JTC renamed local roads in English during the development of Jurong Industrial Estate. An ATEX and IECEx smartphone distributor in Pioneer, Jurong Industrial Estate would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Pioneer, Jurong Industrial Estate has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Pioneer, Jurong Industrial Estate: Shipyard and marine work areas, Paint and coating shops, Fabrication yards | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Pioneer Industrial Area. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Seatrium's own contact page lists a Pioneer Yard at 50 Gul Road, a Benoi Yard at 15 Benoi Road and a Tuas Yard at 51 Pioneer Sector 1.
ST Engineering bought the roughly 141,000 square metre Gul yard in 2023 for ship repair, in addition to its Benoi yard, which is mainly for shipbuilding.
The equatorial climate brings year-round heat and humidity with frequent heavy showers, which affects outdoor shipyard work and the handling of electronic equipment.
Work at Seatrium's Singapore yards includes dry-docking, retrofitting, life extension and conversion of floating production vessels, gas carriers, tankers and jack-up rigs.
Basic worker residential blocks are provided at Benoi Sector and Pioneer Road, so much of the yard workforce lives close to the sites and arrives on foot or by company transport.
Seatrium lists Pioneer Yard at 50 Gul Road, Tuas Yard at 51 Pioneer Sector 1 and Benoi Yard at 15 Benoi Road, three separate gates within the same western industrial belt.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Pioneer, Jurong Industrial Estate. Pioneer is part of Jurong Industrial Estate, with shipyards and heavy industry, so reviewers come from yards, tenants and the estate's developer. Tenants working to international standards would expect ATEX and IECEx evidence tied to the marking. The IS-04Z1 has no certificate yet; certification is in progress.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Pioneer, Jurong Industrial Estate. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Likely candidates are shipyard and marine work areas, paint and coating shops, fabrication yards. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Pioneer, Jurong Industrial Estate.
Not necessarily. Each yard has its own address, switchboard and gate, and contractor induction and permit steps are normally run per yard and per project. Ask your sponsor for the rules for the specific yard and the vessel you will board.
Seatrium describes repair and upgrade work on LNG and LPG carriers, floating production units, jack-up rigs, tankers, container ships and heavy-lift vessels. Gas carriers and floating production units generally bring the strictest hazardous-area controls.
No. Each tenant has a different hazard profile, and classification is set tenant by tenant. A coating shop, a dry dock and a fabrication yard can differ. Confirm with the site operator which areas, if any, are classified before choosing a handheld for the task.
Related guides for Pioneer Industrial Area and for Singapore.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.