Belgium: infrastructure
Nuclear power typically supplies 50-60% of domestic electricity, and in 2023 the lives of Doel 4 and Tihange 3 were extended to 2035, so long-running plant maintenance continues alongside the gas network.
Belgium · ATEX and IECEx
ATEX and IECEx Smartphone Distributor in Belgium
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. Under ATEX, equipment in use before July 2003 can remain in use indefinitely provided a risk assessment shows it is safe, which matters when mixing older and newer devices at long-established plants. An ATEX and IECEx smartphone distributor in Belgium would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicATEX and IECEx
DeviceSmartphone
RouteDistribution
WhereBelgium
Short answer. Belgium has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
At a glance · ATEX and IECEx
Checklist: ATEX and IECEx smartphone for Belgium
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Belgium: Zeebrugge, Ghent canal zone, Feluy | Classified by the site operator |
Product · Belgium
The product behind this search: the SAMS IS-04Z1.
SAMS IS-04Z1
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
- IP68 sealed
- 4,000 mAh battery
- 50 MP camera
- Android 16
- Zone 1 / Zone 21 design target
The market · Belgium
Hazardous-area industry in Belgium
The main operators, industrial areas and sites that the SAMS Belgium market guide covers.
Operators, EPCs and contractors
- BASF Antwerpen
- Second largest BASF site in the world, on the right bank.
- TotalEnergies
- Antwerp refining and petrochemical platform, its largest integrated site in Europe.
- ExxonMobil
- Antwerp refinery, coker and lubricants production on the Scheldt.
- INEOS
- Project ONE ethane cracker under construction on the left bank.
- Covestro
- Polyurethane and polycarbonate production inside the Antwerp cluster.
- Borealis
- Polyolefin production at Kallo and Beringen.
Industrial areas and sites
- Antwerp right bank
- The Scheldelaan chemical belt, from BASF to the refineries.
- Antwerp left bank
- Kallo and Doel, with crackers, polymers and Project ONE.
- Zeebrugge
- LNG import terminal, jetties and the gas interconnection point.
- Ghent canal zone
- North Sea Port industry along the canal to Terneuzen.
- Feluy
- Hainaut petrochemical platform and polymer production.
- Jemeppe-sur-Sambre
- Chemical site in the Sambre valley near Namur.
Field notes · Belgium
More about Belgium that matters for portable equipment
Belgium: logistics and access
Belgium imports raw materials and semi-finished goods and re-exports them after processing, with the Port of Antwerp the most notable of its ports, canals, railways and highways.
Belgium: infrastructure
After Groningen gas supply fell, Belgium converted affected customers from low-calorific L-gas to high-calorific H-gas, a programme that began in 2018 and was completed by the end of summer 2024.
Belgium: industry on the ground
Chemicals, pharmaceuticals, petroleum products, metals and motor vehicle assembly feature among Belgium's industrial base, and chemicals are also a leading export, which means many process plants with flammable solvents and gases.
The term · ATEX and IECEx
What “ATEX and IECEx” means for a smartphone
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Belgium. ATEX is the whole product-side requirement in Belgium, so a reviewer inside the Antwerp cluster would ask for a notified body certificate, CE marking and the EU declaration of conformity. An IECEx route alongside helps groups such as BASF, TotalEnergies and ExxonMobil that also run non-EU plants. Instructions must reach workers in the regional language. Certification is in progress.
The route · distribution
Distributing the IS-04Z1 in Belgium
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Belgium. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
What SAMS looks for in a partner
- Operator relationships
- Existing supplier registrations or a clear route to them with the main operators and contractors in Belgium.
- Ex-competent staff
- People who understand zone classification, markings and the conditions of a certificate.
And equally important
- Local-language support
- Documentation, training and helpdesk in the languages the workforce uses.
- Service capability
- Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Belgium
Frequently asked questions
Can we buy an ATEX and IECEx smartphone in Belgium today?
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
What does an ATEX and IECEx smartphone in Belgium cost?
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Is the IS-04Z1 ATEX and IECEx certified?
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Which sites in Belgium does this cover?
The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.
How do I become a SAMS distributor for Belgium?
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Belgium.
Can I use older Ex equipment alongside new devices in Belgium?
ATEX allows equipment in use before July 2003 to remain in service if a risk assessment shows it is safe. New purchases need to meet the current Directive. Keep the operator's risk assessment on file and ask whether it has additional internal rules for handheld devices.
Where in Belgium is chemical hazardous-area work concentrated?
The Antwerp port area and Flanders are the best-known concentration, with further industry along the Sillon industriel through Liège and Charleroi. Details of individual plants and zones are held by each operator, so request their layout drawings when planning.
Which language must the instructions be in?
Belgian rules expect information that reaches a worker to be in the language of the region where the work happens: Dutch in Flanders, French in Wallonia, and both in Brussels. The manual, safe-use instructions and declaration of conformity are planned in Dutch and French. Certification is still in progress. Check the wording with your site safety adviser.
Related guides
Keep exploring
Other guides for Belgium, other places in Belgium, and the pages behind them.
Hazardous Area Mobile Phone Distributor in BelgiumSame place, different guide
Explosion-Proof Mobile Phone Distributor in BelgiumSame place, different guide
Rugged Mobile Phone Supplier in BelgiumSame place, different guide
Ex-Proof Mobile Phone in BelgiumSame place, different guide
Industrial Mobile Phone Supplier in BelgiumSame place, different guide
Intrinsically Safe Mobile Phone in BelgiumSame place, different guide
Belgium market guideCertification route and regulators
All guides for BelgiumEvery route we cover
Certification statusWhat is in progress
Enquiry · Belgium
Ask about the IS-04Z1 for Belgium
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Enquiry · Belgium
Launching Q4 2026
Planning for Belgium?
Send the zone and gas group of your site and we will reply with the datasheet and schedule.