Suncor is a Calgary-based integrated energy company specialising in synthetic crude from oil sands. The Strathcona refinery near Edmonton runs entirely on oil sands based feedstocks at 135,000 barrels a day, while the Montreal refinery handles 137,000 barrels a day and makes asphalts, solvents and petrochemicals. Buyers searching for an ATEX and IECEx mobile phone supplier for Suncor can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An ATEX and IECEx mobile phone for Suncor cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Suncor: Oil sands extraction and upgrading, Refinery process units, Fuel terminals | Classified by the site operator |
An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main sites and the hazardous-area types a portable device is likely to meet at this organisation.
Prospective suppliers complete an intake form on Suncor's website; if capabilities match its needs they may be contacted for registration and pre-qualification, and high-volume goods suppliers may be asked to transact on SAP Ariba Network. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.
Suncor was formed in 1979 when Sun Oil merged its Canadian refining, retail and conventional oil businesses with Great Canadian Oil Sands, whose plant began production in 1967 as the first commercial Athabasca oil sands development.
Upstream work covers Western Canada, Colorado and offshore eastern Canada, with international offshore developments in the North Sea, so equipment may need to meet different national regimes.
Suncor operates refineries in Edmonton, Sarnia, Montreal and Commerce City in Colorado, supplying industrial, retail and commercial customers, so hazardous areas span several provinces and one US state.
Suncor is based in Calgary and owns and operates an oil sands upgrading plant near Fort McMurray in Alberta, and is described as the world's largest producer of bitumen.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Suncor. A Suncor reviewer assessing a handset for Base Plant, Firebag, Fort Hills or the Edmonton and Sarnia refineries would want certificate evidence in the form the site uses. ATEX and IECEx give international contractors and EPCs a route into Canadian sites alongside local schemes. The IS-04Z1 is in certification and nothing has been issued.
Supply of the IS-04Z1 to Suncor starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
Prospective suppliers complete an intake form on Suncor's website; if capabilities match its needs they may be contacted for registration and pre-qualification, and high-volume goods suppliers may be asked to transact on SAP Ariba Network.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Syncrude is a joint venture that Suncor now operates, and it keeps its own site procedures, contractor induction and permit systems. Treat it as a separate approval, and confirm with Syncrude's safety and procurement teams which certifications and trials they require.
Quebec commonly expects French-language workplace documents, and each province has its own electrical safety authority. Confirm with the Montreal or Sarnia site which labelling, language and certification marks are accepted before supplying portable devices.
Prospective suppliers complete an intake form on Suncor's website, and may be contacted for registration and pre-qualification. High-volume goods suppliers may be asked to use SAP Ariba Network. Check the current process with Suncor. The IS-04Z1 is not yet certified, so no supply route is open.
Related guides for Suncor and for Canada.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.
