India: rules and approvals
Imports are applied for by an Indian service provider or distributor, and there is no separate PESO mark; the Ex marking and the approval letter show compliance.
The IS-04Z1 is designed for people who work inside classified areas at Indian refineries, gas plants, LNG jetties and API blocks: field operators, inspection engineers, shift in-charges, and the HSE and materials teams whose sign-off a device has to survive. A July 2025 PESO procedure accepts an IECEx certificate with test report for all manufacturers, and EU-type examination certificates only from EU-based manufacturers. Distribution partners for India are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. India has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | India: Hazira and Surat, Vadodara, Koyali, Ankleshwar, Mumbai and the offshore basin | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in India. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS India market guide.
Imports are applied for by an Indian service provider or distributor, and there is no separate PESO mark; the Ex marking and the approval letter show compliance.
India imports 82 per cent of its oil needs, so import terminals, tank farms and coastal refineries are central to supply.
India's first oil deposits were found near Digboi in Assam in 1889, and its gas industry began in the 1960s with discoveries in Assam and the Mumbai High field.
Telecom approvals involve TEC's MTCTE scheme, WPC Equipment Type Approval for radio equipment, BIS registration for electronics, and trusted-source designation for equipment connected to licensed networks.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In India. An Indian procurement or HSE reviewer would expect IECEx evidence and the PESO route, since the sheet lists both as in progress. ATEX evidence also helps international EPCs and contractors working in India and abroad. A dual route lets one pack serve the operator's review and visiting teams. No certificate has been issued yet.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for India yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for India covers Jamnagar, Gujarat, Dahej and the Gujarat PCPIR, Hazira and Surat, Vadodara, Koyali, Ankleshwar, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for India.
PESO approval is required for Ex electrical apparatus at petroleum, gas cylinder and pressure vessel premises, and imports are applied for through an Indian service provider or distributor. Whether it applies to a given site depends on the licensing category, so ask the site's safety team and a PESO consultant.
Typically the large coastal refineries such as Jamnagar, offshore platforms in the Western Offshore region, petrochemical and fertiliser complexes, and gas fields in Assam and Gujarat. Each operator issues its own area classification, so request the drawing, gas group and temperature class first.
The market guide lists PESO, BIS and WPC approvals as in progress, alongside IECEx. None has been granted yet. Which are needed for a given site depends on the operator and the regulator, so ask the site operator and check the current status before ordering.
More on India, and on other places in India.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.