United States: rules and approvals
The FCC regulates radio frequency devices between 9 kHz and 3000 GHz, and most radio-containing products must follow an equipment authorisation procedure before being marketed.
The IS-04Z1 is built for people who work inside classified locations at American refineries, gas plants, terminals and wellsites, and for the HSE and IT teams who decide what goes through the gate. Buyers searching for a rugged smartphone supplier for United States can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. A rugged smartphone for United States cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | United States: Baton Rouge corridor, Corpus Christi, Permian Basin | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United States. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS United States market guide.
The FCC regulates radio frequency devices between 9 kHz and 3000 GHz, and most radio-containing products must follow an equipment authorisation procedure before being marketed.
Zone-rated equipment in the US carries the AEx marking, for example Class I, Zone 0, AEx ia IIC T6, so a datasheet showing only ATEX or IECEx marks does not show US approval.
US workplace rules accept electrical equipment in explosive atmospheres only if it is approved by an OSHA-recognised NRTL, and OSHA states that the NRTL's specific mark is required, so CE and ATEX do not count.
The Permian also yields potash, mined by the room-and-pillar method in Lea and Eddy counties in New Mexico, which adds mining and mineral-dust hazards to the oil and gas activity.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In United States. A Permian wellpad in August and a North Dakota gas plant in January are two ends of one fleet, and the deepwater Gulf adds salt and weather. IP68 sealing and a rugged build are aimed at that range. IP68 is an ingress rating and does not by itself provide explosion protection.
There is no stock to order for United States yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for United States covers Permian Basin, Houston Ship Channel, Beaumont and Port Arthur, Lake Charles and Calcasieu, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Not on its own. US workplace rules accept equipment approved by an OSHA-recognised NRTL and marked accordingly, and ATEX or IECEx certificates are not accepted in their place. Manufacturers usually need a separate US listing, so check the NRTL mark and the Class, Division or Zone marking on any device.
Both exist. Article 500 of the National Electrical Code defines the Class and Division system, and Articles 505 and 506 define Zones. Many existing refineries and gas plants are still classified by Division, so confirm which system the area drawing uses before selecting equipment markings.
IP68 sealing and a rugged build are aimed at August heat and January cold, and the 4,000 mAh battery at a shift away from the truck. The approved ambient range will come from the certificate, which is in progress, so confirm it for both extremes.
More on United States, and on other places in United States.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.