Denmark: logistics and access
Port Esbjerg calls itself the world's largest base port for offshore wind activities and says it has been involved in shipping components to more than 65 offshore wind projects.
The IS-04Z1 is an explosion proof mobile phone designed for Zone 1 and Zone 21, from a wet deck 225 km west of Esbjerg to a fermentation building at Kalundborg and a biogas upgrading skid on Lolland. Buyers searching for a rugged mobile phone supplier for Denmark can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. A rugged mobile phone for Denmark cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Denmark: Stigsnæs, Prøvestenen and Copenhagen harbour, Esbjerg | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Denmark. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Denmark market guide covers.
Port Esbjerg calls itself the world's largest base port for offshore wind activities and says it has been involved in shipping components to more than 65 offshore wind projects.
Denmark imports about 12% of its energy but is also an exporter, and its electricity grid is connected by transmission lines to other European countries.
Denmark has North Sea oil and gas but ranked only 57th among net crude exporters in 2023 after ranking 32nd in 2008, so offshore work is mature, with decommissioning and maintenance a larger share.
North Sea natural gas projects began in 1984 and North Sea production made Denmark self-sufficient in energy in 1997, which explains the established offshore supply chain on the west coast.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Denmark. The North Sea and the west coast of Jutland treat weather sealing as a daily test: salt, wind and horizontal rain. IP68 sealing and a rugged build are aimed at exposed working, not at a pocket. IP68 is not explosion protection, which comes from the ATEX certificate and marking.
Supply of the IS-04Z1 to Denmark starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for Denmark covers Esbjerg, The Danish North Sea, Fredericia, Kalundborg, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Cold, wet and windy conditions affect battery life and touchscreen use with gloves, particularly offshore and at wind farms. Check the lowest rated ambient temperature on the certificate, the water ingress rating and whether touch input works with wet or gloved hands.
Typically the EU declaration of conformity, the certificate, the Ex marking details and instructions in the local language, which may be Danish or English depending on the operator. Request the site's equipment register template so supplier documents can be matched to it.
The classification of areas into zones comes from the emergency management agency under an executive order, while the employer's duty to assess explosion risk and hold an explosion protection document comes from the Danish Working Environment Authority. SAMS classifies nothing. Confirm the arrangement with the site operator for your plant.
Other guides for Denmark, other places in Denmark, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.