Brazil: rules and approvals
Certification is carried out by an INMETRO-accredited product certification body, called an OCP, and Model 5 certificates, which include a quality system audit and surveillance, are valid for six years.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas on Brazilian platforms, refineries, petrochemical units, mills and terminals. If you are specifying a rugged cell phone for Brazil, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Brazil: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Brazil: Santos Basin pre-salt, Campos Basin, Duque de Caxias | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Brazil. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Brazil market guide.
Certification is carried out by an INMETRO-accredited product certification body, called an OCP, and Model 5 certificates, which include a quality system audit and surveillance, are valid for six years.
Petrobras was created in 1953 under the slogan The Oil Is Ours, was given a legal monopoly, and is headquartered in Rio de Janeiro; its REDUC refinery began operating in 1961.
Portaria INMETRO No. 115 of 21 March 2022 sets the conformity assessment rules for electrical equipment in explosive atmospheres, and it replaced Portaria No. 179/2010 from 1 April 2022.
ANATEL's warranty declaration rule rests on Resolution 715/2019, Act 3939/2021 and the Consumer Protection Code, so the local representative takes on legal responsibility for after-sales support.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Brazil. A jetty at Suape, a deck in the Santos Basin and a unit at Camaçari all combine heat with salt-laden air and constant humidity. IP68 sealing and a rugged build are designed for the physical side. IP68 is a dust and water rating only; explosion protection comes from the INMETRO-accredited certification, not from the enclosure.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for Brazil covers Santos Basin pre-salt, Campos Basin, Duque de Caxias, Paulínia, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Under Portaria 115/2022 the manufacturer or the importer can apply to an INMETRO-accredited certification body, and the certificate carries the INMETRO seal. Who holds the certificate and how the factory is audited depend on the model chosen, so confirm the details with an OCP.
Not directly. INMETRO requires certification by an accredited OCP under Portaria 115/2022, although an OCP may base its certificate on an IECEx test report and quality report under Model 5. ATEX and IECEx certificates alone do not give market access, so confirm the route with a Brazilian OCP.
Android 16 runs the interface in Brazilian Portuguese, and Portuguese documentation is part of the launch package. That matters for training records under NR-20 and NR-10, which auditors expect in the working language. Certification is still in progress, so documentation is not yet final. Ask the supplier for sample pages.
Related guides for Brazil and for Brazil.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.