Switzerland: industry on the ground
Basel is Switzerland's main pharmaceutical centre, home to both Novartis and Roche.
The IS-04Z1 is an intrinsically safe Android handset designed for solvent and powder atmospheres, from a production building in Basel or Visp to a loading rack at Cressier and a digester hall at a cantonal wastewater works. Switzerland relies mainly on hydroelectric power, nuclear power and natural gas, and plans to phase out its five nuclear power plants as they reach the end of their lives, with 2044 given as a phase-out date. A rugged cell phone distributor in Switzerland would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Switzerland has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Switzerland: Monthey, Kaisten and the Fricktal, Schaffhausen | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Switzerland. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Switzerland market guide covers.
Basel is Switzerland's main pharmaceutical centre, home to both Novartis and Roche.
Petroleum and motor fuels account for 43% of energy consumed, electricity 26% and gas 15%, with households and transport each using about one third and manufacturing and services each just under one fifth.
Machinery, chemicals, vehicles and metals are leading industries, so classified areas occur more in chemical and pharmaceutical plants and process industry than in oil and gas.
The Mantelerlass, passed on 29 September 2023, sets a target of 35 TWh a year from new renewable technologies by 2035, compared with about 6 TWh a year in 2022, which implies major construction work.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Switzerland. A Swiss evaluation is rarely about heat or sand. It is about a plant that is cleaned rather than rained on, with valleys and hills rather than plains. IP68 sealing and a rugged build are aimed at routine wipe-down. IP68 is an ingress rating and gives no explosion protection by itself.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Switzerland yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for Switzerland covers Basel and Schweizerhalle, Visp, Monthey, Kaisten and the Fricktal, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Switzerland.
Switzerland is not an EU member, but it generally aligns its equipment rules with European requirements, so ATEX-marked devices are commonly accepted. Confirm the current requirement and any Swiss conformity marking with the site operator or your importer before ordering.
German, French and Italian are all national languages depending on the canton, and many industrial sites also work in English. Ask the operator which language it requires for instructions and certificates, and provide the declaration of conformity together with the Ex marking details.
IP68 sealing and a rugged build are aimed at a cleaned plant rather than a rained-on one, but your cleaning agents and routine must be checked. Test a unit with your own procedure and confirm compatibility with the site's validation team.
More on Switzerland, and on other places in Switzerland.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Name the site and the operator and we will send what is available before launch.