Belgium: logistics and access
Belgium imports raw materials and semi-finished goods and re-exports them after processing, with the Port of Antwerp the most notable of its ports, canals, railways and highways.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. Nuclear power typically supplies 50-60% of domestic electricity, and in 2023 the lives of Doel 4 and Tihange 3 were extended to 2035, so long-running plant maintenance continues alongside the gas network. A rugged cell phone distributor in Belgium would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Belgium has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ingress protection | IP65 to IP68 sealing | IP68 design |
| Drop and shock | A stated drop height onto concrete | Specification on request |
| Explosion protection | A separate certificate and marking | In progress; not issued |
| Where it applies | Belgium: Zeebrugge, Ghent canal zone, Feluy | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Belgium market guide.
Belgium imports raw materials and semi-finished goods and re-exports them after processing, with the Port of Antwerp the most notable of its ports, canals, railways and highways.
After Groningen gas supply fell, Belgium converted affected customers from low-calorific L-gas to high-calorific H-gas, a programme that began in 2018 and was completed by the end of summer 2024.
Under ATEX, equipment in use before July 2003 can remain in use indefinitely provided a risk assessment shows it is safe, which matters when mixing older and newer devices at long-established plants.
Chemicals, pharmaceuticals, petroleum products, metals and motor vehicle assembly feature among Belgium's industrial base, and chemicals are also a leading export, which means many process plants with flammable solvents and gases.
A rugged phone is built to survive water, dust, drops and rough handling, usually rated by an IP code and a drop specification. Ruggedness is an environmental property: it says nothing about whether a phone may be used where flammable gas or dust is present. That is decided by explosion-protection certification and marking.
The IS-04Z1 combines both: an IP68 sealed rugged build and a design for Zone 1 and Zone 21 (marking target Ex ib IIC T4). The explosion-protection certificates are in progress and none has been issued.
In Belgium. A device on a jetty at Zeebrugge or the Scheldelaan lives with driven rain, salt air and cleaning rather than fine dust. IP68 sealing and a rugged build are aimed at that duty cycle, including wash-down. IP68 is an ingress rating, and explosion protection comes from the ATEX certificate and marking, not from the enclosure rating.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Belgium yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
It is designed to IP68 sealing, with glove-friendly controls. Ruggedness is not explosion protection: that depends on the certificates, which are in progress.
The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Belgium.
Belgium is an EU member, so ATEX Directive 2014/34/EU applies to equipment placed on its market, and employers zone workplaces under Directive 1999/92/EC. Zone 1 and Zone 2 devices should carry the Ex and CE markings. Confirm the exact accepted categories with each site operator.
Dutch in Flanders, French in Wallonia and sometimes English at international chemical sites. Instructions are typically expected in the user's language for ATEX equipment, so ask the operator which language it expects. Bilingual documentation packs can avoid delays at gate control.
Camera control is why ordinary phones are refused at the gate on Seveso sites. Android 16 with EMM and MDM lets the camera, location services and application list be set centrally, so permissions can be shown during evaluation. Whether a site accepts it still depends on its own rules. Confirm with the operator before taking a unit in.
More on Belgium, and on other places in Belgium.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Name the site and the operator and we will send what is available before launch.