Peru: background
Shell discovered the Camisea fields in 1986 under blocks 38 and 42, a contract signed in 1981 that covered about 20,000 square kilometres of the southern Ucayali Basin.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Peru every shift: copper mine and concentrator operators, Camisea gas-field crews, refinery engineers, and the HSE and telecoms teams who equip them. Buyers searching for an intrinsically safe smartphone supplier for Peru can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. An intrinsically safe smartphone for Peru cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Peru: Camisea, Talara, Cuajone / Toquepala | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Peru. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Peru market guide.
Shell discovered the Camisea fields in 1986 under blocks 38 and 42, a contract signed in 1981 that covered about 20,000 square kilometres of the southern Ucayali Basin.
The open pit at Cerro de Pasco is a well-known silver mine in the Andes, a reminder that much Peruvian mining takes place in mountain terrain far from the coast.
In 2019 Peru was the world's second-largest producer of copper, silver and zinc, third for lead and eighth for gold, so mining is a major source of hazardous and dusty areas.
Camisea's remote jungle location and Andean pipeline route mean access is long and difficult, so spares, battery supplies and support for portable devices need planning in advance.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Peru. A round across an open pit or a long concentrator, or through the Camisea plant in the Amazon foothills, is a full shift away from a charger. An intrinsically safe handheld lets one device log, photograph and communicate in classified areas, with the 4,000 mAh battery specified for a shift rather than a short visit.
Supply of the IS-04Z1 to Peru starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
The market guide for Peru covers Cuajone / Toquepala, Antamina, Cerro Verde, Las Bambas, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
MTC, the Ministerio de Transportes y Comunicaciones, runs type approval for radio equipment, and a testing partner reports that it is based on FCC standards with no local laboratory tests, no local representative requirement and no extra label. Confirm current requirements with MTC or a local agent.
Typically at the Camisea wells and plants in the Amazon basin, the Malvinas separation plant, the Pisco terminal, refineries on the coast, and mines with diesel storage, explosives and dust. Each operator issues its own classification, so request the zone drawing and gas or dust group.
The device is designed with an outdoor-readable display and rugged sealing, but ambient and altitude limits are fixed by the certificate, which is not yet issued. Compare the published range with your mine's conditions and confirm with the operator before use at sites above 4,000 metres.
Related guides for Peru and for Peru.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.