Remote sites
Large operations such as Grasberg, at about 4,100 metres elevation, rely on long supply chains by air, road and sea.
Indonesian mining includes coal in Kalimantan, nickel in Sulawesi and the Grasberg copper-gold complex in Papua. Fuel storage, coal handling, process plants and smelters create hazardous areas, with dust areas at coal preparation and underground work at Grasberg. If you are specifying an intrinsically safe mobile phone for Indonesian mining regions, this page covers the markings, the approvals and the current certification status of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Indonesian mining regions: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Level of protection | ia, ib or ic matched to the zone | ib, for Zone 1 |
| Entity parameters | Uo, Io and Po within the device limits | Published with the certificate |
| Accessories | Chargers and cases certified with the device | Defined at certification |
| Where it applies | Indonesian mining regions: Coal handling and preparation plants (dust, Zone 21), Fuel and lubricant storage, Underground mine areas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Indonesia Mining. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
A short profile of the site and the kinds of classified area that matter for portable equipment.
Large operations such as Grasberg, at about 4,100 metres elevation, rely on long supply chains by air, road and sea.
The Indonesia Morowali Industrial Park, begun in 2013 in Central Sulawesi, is reported to be the largest nickel-based industrial area, with 11 smelters.
PT Borneo Alumina Indonesia finished an alumina refinery in West Kalimantan with a capacity of 1 million tonnes a year, starting operations in December 2024, and Freeport built a 0.6 million tonne copper smelter at Manyar in East Java.
Nickel output reached about 2.2 million tonnes in 2023 and relies heavily on coal-fired power, accounting for around 22 percent of national energy and industrial emissions, so captive coal power plants sit beside many smelters.
The Indonesia Morowali Industrial Park in Central Sulawesi, the country's largest nickel processing site, covers 2,000 hectares and is served by its own seaport, an airport and a 2 GW coal power plant.
In 2024 Indonesia was estimated to be the world's leading producer of mined nickel at 62 percent of global output, and second for tin at 19 percent and cobalt at 12 percent.
Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.
The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.
In Indonesian mining regions. Mine inspections, fuel storage checks and plant rounds are spread over large, remote sites. A handheld designed for intrinsically safe use could keep checklists and photos on one device, but only where its gas marking suits the area. Underground and dust areas need separate assessment.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.
Likely candidates are coal handling and preparation plants (dust, zone 21), fuel and lubricant storage, underground mine areas, smelter and process plant areas. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
Typical examples are underground methane or coal-dust zones, fuel storage and workshops, explosives magazines, smelter and processing areas with gases or dust, and captive power plants. Each operator classifies its own site, so confirm the zones with the mine's safety department.
Yes. Smelters and acid-leach plants emphasise process gases, chemicals and high temperatures, while coal mines emphasise methane and combustible dust. The device choice and the area type differ, so ask each site for its classification and permit rules.
Remote operations rely on long supply chains, so a failed device may take time to replace. Plan spares, local service access and offline-capable apps. Check heat, wet and altitude conditions at each site. Confirm site rules with the operator.
More on Indonesia Mining, and on other places in Indonesia.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.