Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
ENAP · intrinsically safe

Intrinsically Safe Mobile Phone for ENAP

ENAP is Chile's state-owned petroleum company, created by law in 1950 and based in Santiago. Through ENAP Refinerias it runs the Aconcagua, Bio Bio and Gregorio refineries, with combined capacity of 238,000 barrels per day, covering all of Chile's refining capacity. If you are specifying an intrinsically safe mobile phone for ENAP, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for ENAP, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceMobile Phone
RouteSpecification
WhereENAP

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for ENAP: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.

At a glance · intrinsically safe

Checklist: intrinsically safe mobile phone for ENAP

Checks a reviewer should make, with the IS-04Z1 position
CheckWhat to look forIS-04Z1 today
Level of protectionia, ib or ic matched to the zoneib, for Zone 1
Entity parametersUo, Io and Po within the device limitsPublished with the certificate
AccessoriesChargers and cases certified with the deviceDefined at certification
Where it appliesENAP: Refinery process units, Fuel storage and loading, Marine terminalsClassified by the site operator
Product · Chile

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Chile. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The organisation · ENAP

Empresa Nacional del Petroleo (ENAP): operations and where an Ex phone fits

A short profile of its operations and the kinds of classified area that matter for portable equipment.

Sites and areas

  • Aconcagua refinery
  • Bio Bio refinery
  • Gregorio refinery (Magallanes)
  • Maritime terminals at Quintero and San Vicente

Classified areas

  • Refinery process units
  • Fuel storage and loading
  • Marine terminals
Supplier approval · ENAP

Becoming an approved supplier to ENAP

ENAP's website offers a supplier management portal (gestion de proveedores) for joining its vendor community and registering for procurement opportunities. The Ex certificate and an organisation's own vendor or engineering approval are two separate timelines; SAMS is working towards both and holds neither today.

Field notes · ENAP

More about ENAP that matters for portable equipment

ENAP: logistics and access

The three refineries supply over 80% of Chile's fuel needs, so plant shutdowns and maintenance programmes have national importance and are scheduled carefully with contractors.

ENAP: industry on the ground

ENAP lists the main units at its Aconcagua refinery as including topping and vacuum, catalytic cracking, delayed coking, hydrocracking, alkylation, isomerisation, sulphuric acid and sulphur plants, with a flare system and its own emergency response brigade and fire station.

ENAP: geography and layout

The company is state-owned and based in Las Condes, Santiago, while its original oil exploration area lies far south in Tierra del Fuego and the Strait of Magellan.

ENAP: industry on the ground

ENAP is engaged in exploration, production, refining and marketing of hydrocarbons and their derivatives, so hazardous areas include refinery units, product storage and fuel distribution points.

The term · intrinsically safe

What “intrinsically safe” means for a smartphone

Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.

The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.

In ENAP. Rounds across refinery process units, fuel storage and the marine terminals at Quintero and San Vicente involve reading gauges, photographing equipment and filing permits. A handheld designed as intrinsically safe could carry that on one device. The IS-04Z1 is designed for this, though certification is still in progress.

The route · specification

Specifying an intrinsically safe mobile phone for ENAP

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · ENAP

Frequently asked questions

Can ENAP buy the IS-04Z1 today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does an intrinsically safe mobile phone for ENAP cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

What does ‘intrinsically safe’ mean for the IS-04Z1?

The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.

How does ENAP approve suppliers?

ENAP's website offers a supplier management portal (gestion de proveedores) for joining its vendor community and registering for procurement opportunities.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Do Chilean refineries face particular seismic or coastal conditions for equipment?

Chile is seismically active and two of the refineries are coastal, so sites typically apply robust fixing, corrosion protection and emergency procedures. For handheld devices this means checking drop resistance and sealing. Confirm each site's conditions and rules with the refinery directly.

Which ENAP sites are likely to need Ex-rated mobile devices?

The three refineries at Aconcagua, Bio Bio and Gregorio are the main process sites, with storage and loading areas, and the southern production areas are another. Zoning is decided per installation, so ask ENAP's HSE or maintenance teams for area classification drawings before specifying devices.

How does ENAP's supplier portal affect a new device supplier?

ENAP's website offers a supplier management portal for joining its vendor community and registering for procurement opportunities. A new supplier would use it, then meet ENAP's technical and HSE requirements. Confirm current steps with ENAP. The IS-04Z1 has no certificate yet, so no approval can be claimed.

Enquiry · ENAP

Ask about the IS-04Z1 for ENAP, Chile

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · ENAP

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for ENAP?

Name the site and the operator and we will send what is available before launch.