Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
New Zealand · intrinsically safe

Intrinsically Safe Cell Phone in New Zealand

The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in New Zealand every shift: Taranaki gas-field operators, methanol and fertiliser plant crews, dairy-processing engineers managing milk-powder dust risk, and the HSE and telecoms teams who equip them. This page explains what to look for in an intrinsically safe cell phone for New Zealand, and where the IS-04Z1 stands against that list today.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for New Zealand, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceCell Phone
RouteSpecification
WhereNew Zealand

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for New Zealand: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · intrinsically safe

Checklist: intrinsically safe cell phone for New Zealand

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Level of protectionia, ib or ic matched to the zoneib, for Zone 1
Entity parametersUo, Io and Po within the device limitsPublished with the certificate
AccessoriesChargers and cases certified with the deviceDefined at certification
Where it appliesNew Zealand: Marsden Point, Dairy processing sites nationwide, TaranakiClassified by the site operator
Product · New Zealand

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in New Zealand. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · New Zealand

Hazardous-area industry in New Zealand

The main operators, industrial areas and sites that the SAMS New Zealand market guide covers.

Operators, EPCs and contractors

Methanex
Methanol production at Motunui, Taranaki; the Waitara Valley plant has been idle since 2021
Todd Energy
Upstream gas and condensate production in the Taranaki basin
OMV New Zealand
Operator of Maui, Pohokura and other Taranaki offshore and onshore fields
Ballance Agri-Nutrients
Urea and ammonia production at Kapuni, Taranaki
Fonterra
The world’s largest dairy exporter — milk-powder drying and processing nationwide
Channel Infrastructure
Operator of the former Marsden Point refinery, now a fuel import terminal

Industrial areas and sites

Taranaki
New Zealand’s principal oil, gas and petrochemical region
Motunui / Waitara Valley
Methanex methanol production complexes
Kapuni
Gas field and Ballance Agri-Nutrients fertiliser plant
Marsden Point
Former refinery, now Channel Infrastructure’s import terminal, Northland
Dairy processing sites nationwide
Fonterra and other processors’ milk-powder drying towers and storage
Field notes · New Zealand

More about New Zealand that matters for portable equipment

New Zealand: industry on the ground

The Marsden Point refinery operated from 1964 to 2022 and the site now imports refined fuel, about half from South Korea and about a third from Singapore as of 2025, so tank and terminal work continues there.

New Zealand: industry on the ground

Gas-based plants developed from the 1970s included an ammonia-urea plant at Kapuni, methanol at Waitara, synthetic petrol at Motunui and gas-fired power stations at New Plymouth and Huntly; confirm each site's current status.

New Zealand: rules and approvals

AS/NZS 60079 is the Australia and New Zealand adoption of the IEC 60079 series, covering classification, selection, installation, inspection and repair of electrical equipment in explosive atmospheres.

New Zealand: background

The Alpha well drilled at New Plymouth in 1865 was the first oil well in the Commonwealth; later gas from Kapuni (1970) and Maui (1978) supported large gas-based industrial plants.

The term · intrinsically safe

What “intrinsically safe” means for a smartphone

Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.

The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.

In New Zealand. A plant round at Kapuni or Motunui, or a shift through a milk-powder drying and storage area, is a full working day with no recharge point inside the hazard zone. An intrinsically safe handheld lets the same device record readings, take photographs and run a work-order app, from the control room to the tower.

The route · specification

Specifying an intrinsically safe cell phone for New Zealand

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · New Zealand

Frequently asked questions

Can we buy an intrinsically safe cell phone in New Zealand today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an intrinsically safe cell phone in New Zealand cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

What does ‘intrinsically safe’ mean for the IS-04Z1?

The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.

Which sites in New Zealand does this cover?

The market guide for New Zealand covers Taranaki, Motunui / Waitara Valley, Kapuni, Marsden Point, among others. Site-level pages are linked below.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

Is New Zealand's remote geography a supply issue for Ex devices?

Most Ex devices arrive by sea or air freight, and the North Island holds nearly all the gas network, so lead times to Taranaki or Auckland differ from the South Island. Plan spare batteries and accessories in country, and confirm local after-sales support before ordering.

Where do intrinsically safe phones get used in New Zealand's oil and gas sector?

Mainly in Taranaki, where all domestic oil and gas is produced, along the North Island gas pipeline network, at Ahuroa gas storage, and at fuel import terminals such as Marsden Point. Site permits and induction rules differ by operator, so check before arrival.

Is milk powder really a hazardous area issue?

Dried milk powder is a well-documented combustible dust, and drying towers and storage silos are classified accordingly. The IS-04Z1 is designed for Zone 21 as well as Zone 1, but certification is in progress. Confirm the zone and dust group with the site operator before use.

Enquiry · New Zealand

Ask about the IS-04Z1 for New Zealand

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · New Zealand

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for New Zealand?

Name the site and the operator and we will send what is available before launch.