Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Czech Republic · intrinsically safe

Intrinsically Safe Cell Phone Distributor in Czech Republic

The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for Czech refineries, chemical plants, tank farms and coke ovens rather than for a catalogue. The Orlen Unipetrol group includes refineries and plants at Litvínov and Kralupy nad Vltavou, Paramo at Pardubice and Kolín, Spolana at Neratovice, and two research centres, and it is the only crude oil processor in the country. An intrinsically safe cell phone distributor in Czech Republic would carry the IS-04Z1 to these buyers once certification completes.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Czech Republic, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicintrinsically safe
DeviceCell Phone
RouteDistribution
WhereCzech Republic

Short answer. Czech Republic has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.

Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · intrinsically safe

Checklist: intrinsically safe cell phone for Czech Republic

Checks a reviewer should make, with the IS-04Z1 position
CheckWhat to look forIS-04Z1 today
Level of protectionia, ib or ic matched to the zoneib, for Zone 1
Entity parametersUo, Io and Po within the device limitsPublished with the certificate
AccessoriesChargers and cases certified with the deviceDefined at certification
Where it appliesCzech Republic: Neratovice, Valašské Meziříčí, PardubiceClassified by the site operator
Product · Czech Republic

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Czech Republic. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Czech Republic

Hazardous-area industry in Czech Republic

The main operators, industrial areas and sites that the SAMS Czech Republic market guide covers.

Operators, EPCs and contractors

Orlen Unipetrol
Litvínov and Kralupy refineries and the Záluží petrochemical complex.
Spolana
PVC production at Neratovice.
Synthos Kralupy
Styrene and synthetic rubber production beside the Kralupy refinery.
Deza
Coal tar and crude benzol processing at Valašské Meziříčí.
Paramo
Bitumen and lubricant production at Pardubice.
Lovochemie
Nitrogen fertiliser production at Lovosice on the Elbe.

Industrial areas and sites

Litvínov and Záluží
Refinery, steam cracker and downstream polymer plants.
Kralupy nad Vltavou
Conversion refinery with a fluid catalytic cracker.
Neratovice
Chlor-alkali and PVC chemistry on the Elbe.
Valašské Meziříčí
Tar and benzol processing in the Zlín region.
Pardubice
Refining by-products, bitumen and lubricant blending.
Lovosice
Fertiliser production and river and rail loading.
Field notes · Czech Republic

More about Czech Republic that matters for portable equipment

Czech Republic: rules and approvals

ATEX equipment is split into Group I for mining and Group II for surface industries, which matters in a country with coal mining as well as refining and chemicals.

Czech Republic: industry on the ground

Gas use was 9.4 billion cubic metres in 2021 and 7.1 billion in 2023, so gas distribution and industrial gas burners remain widespread across Czech industry.

Czech Republic: logistics and access

State operator MERO finished expanding the Transalpine pipeline at the end of 2024, delivering up to 8 million tonnes of oil a year, with the central oil depot at Nelahozeves as a key storage point.

Czech Republic: industry on the ground

The country has two refineries, both owned by Česká rafinérská, including the Litvínov refinery, so Litvínov and Kralupy are the best-known flammable-liquid processing sites.

The term · intrinsically safe

What “intrinsically safe” means for a smartphone

Intrinsic safety limits the electrical and thermal energy in a circuit so that neither a spark nor a hot surface can ignite a gas or dust atmosphere, even when a fault occurs. The ib level, used for Zone 1, tolerates one fault. It is the usual way to make a handheld device that a worker carries continuously through a hazardous area.

The IS-04Z1 is designed on this principle for Zone 1 and Zone 21 (marking target II 2 G Ex ib IIC T4). Intrinsic safety is a design basis, not a certificate: certification is in progress and none has been issued yet.

In Czech Republic. Rounds at Záluží, Nelahozeves or Ostrava involve walking long distances across extended plants in cold weather, with no charger inside a classified area. An intrinsically safe handheld is designed for those rounds, with a 4,000 mAh battery sized for a whole shift with the camera and a maintenance application in use.

The route · distribution

Distributing the IS-04Z1 in Czech Republic

SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Czech Republic yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.

What SAMS looks for in a partner

Operator relationships
Existing supplier registrations or a clear route to them with the main operators and contractors in Czech Republic.
Ex-competent staff
People who understand zone classification, markings and the conditions of a certificate.

And equally important

Local-language support
Documentation, training and helpdesk in the languages the workforce uses.
Service capability
Spares, battery replacement and repair routed through SAMS-approved channels.
Questions · Czech Republic

Frequently asked questions

Can we buy an intrinsically safe cell phone in Czech Republic today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an intrinsically safe cell phone in Czech Republic cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

What does ‘intrinsically safe’ mean for the IS-04Z1?

The circuits are designed to limit energy so a spark or hot surface cannot ignite a gas or dust atmosphere, even with one fault (level ib, Zone 1). Certification of that design is in progress.

Which sites in Czech Republic does this cover?

The market guide for Czech Republic covers Litvínov and Záluží, Kralupy nad Vltavou, Neratovice, Valašské Meziříčí, among others. Site-level pages are linked below.

How do I become a SAMS distributor for Czech Republic?

Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Czech Republic.

Are Czech refineries covered by ATEX rules for handheld devices?

The Czech Republic is an EU member, so ATEX Directive 2014/34/EU applies to equipment and employers zone workplaces under Directive 1999/92/EC. Refineries such as Litvínov typically also have internal device approval and permit-to-work procedures, so ask the HSE office before bringing phones in.

What language should Czech site documents be in?

Czech is the usual site language, and ATEX user instructions are typically expected in the local language of the destination. A Czech-language instruction sheet with the certificate pack often speeds up acceptance. Ask the operator whether it also accepts English documentation for contractors.

Why does the issuing notified body matter to Czech buyers?

FTZÚ in Ostrava-Radvanice is notified body 1026, and Czech engineers recognise it on an Ex certificate, so buyers often ask which body issued one before anything else. The certificate number, issuing body and marking string will be published for checking. No certificate exists yet, as certification is in progress.

Enquiry · Czech Republic

Ask about the IS-04Z1 for Czech Republic

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · Czech Republic

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Czech Republic?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.