Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Australia · industrial

Industrial Mobile Phone in Australia

A Zone 1 / Zone 21 smartphone for crews on Australian LNG trains, offshore facilities, processing plants and remote mine sites. If you are specifying an industrial mobile phone for Australia, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Australia, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicindustrial
DeviceMobile Phone
RouteSpecification
WhereAustralia

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Australia: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.

At a glance · industrial

Checklist: industrial mobile phone for Australia

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Ingress protectionIP rating for dust and waterIP68 design
Fleet managementEMM and MDM supportAndroid 16 with EMM and MDM
Explosion protectionA separate certificate and markingIn progress; not issued
Where it appliesAustralia: Karratha and the Burrup Peninsula, Onslow, Western Australia, DarwinClassified by the site operator
Product · Australia

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Australia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Australia

Hazardous-area industry in Australia

The main operators, industrial areas and sites that the SAMS Australia market guide covers.

Operators, EPCs and contractors

Woodside Energy
North West Shelf, Pluto LNG and the Karratha Gas Plant
Chevron Australia
Gorgon on Barrow Island and Wheatstone at Onslow
INPEX
Ichthys LNG at Darwin and Browse Basin facilities
Shell Australia
Prelude FLNG and QCLNG on Curtis Island
Santos
GLNG at Gladstone and the Moomba gas plant
ConocoPhillips and Origin Energy
Australia Pacific LNG and Surat Basin coal seam gas

Industrial areas and sites

Karratha and the Burrup Peninsula
Karratha Gas Plant, Pluto LNG and offshore support
Onslow, Western Australia
Wheatstone LNG and the Ashburton North estate
Darwin
Ichthys LNG, marine supply base and harbour work
Gladstone and Curtis Island
Three LNG trains plus alumina and coal wharves
Bowen Basin, Queensland
Coal mining, methane drainage and handling plants
Pilbara, Western Australia
Iron ore mines, workshops and bulk fuel handling
Field notes · Australia

More about Australia that matters for portable equipment

Australia: people and language

The Pilbara has more than 45,000 residents, most living in the western third in towns such as Port Hedland, Karratha and Wickham, while the eastern third is almost entirely desert.

Australia: geography and layout

The Pilbara covers 507,896 square kilometres in the north of Western Australia, a large, dry, sparsely populated region known for iron ore, with four local government areas.

Australia: rules and approvals

ANZEx has been owned by JAS-ANZ since August 2016, and Queensland's Electrical Safety Regulation 2026 took effect on 1 September 2026, so state rules continue to evolve.

Australia: rules and approvals

Operators typically check for a current IECEx or ANZEx certificate, a suitable gas group and temperature class, a Hazardous Area Verification Dossier under AS/NZS 60079.14 and installer competency.

The term · industrial

What “industrial” means for a smartphone

“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.

The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.

In Australia. Rostered crews and contractors rotate through sites, so handsets move between people. Android 16 with EMM and MDM support allows enrolment, remote lock, remote wipe and controlled updates when crews change. Coverage uses 4G LTE, Wi-Fi, Bluetooth and NFC, with four-constellation GNSS holding a position in a pit, and charging stays in a safe area.

The route · specification

Specifying an industrial mobile phone for Australia

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · Australia

Frequently asked questions

Can we buy an industrial mobile phone in Australia today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does an industrial mobile phone in Australia cost?

SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.

Is the IS-04Z1 an industrial phone as well as an Ex phone?

Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.

Which sites in Australia does this cover?

The market guide for Australia covers Karratha and the Burrup Peninsula, Onslow, Western Australia, Darwin, Gladstone and Curtis Island, among others. Site-level pages are linked below.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

What conditions affect devices in the Pilbara?

The Pilbara is hot, dry and dusty, with long distances between sites and towns. Check the operating temperature range, dust ingress rating and battery life in heat, and confirm with the operator any site rules on permits, inductions and mobile devices in classified areas.

What is the Hazardous Area Verification Dossier?

It is the installation documentation expected under AS/NZS 60079.14, showing that the equipment, its certificate and its installation suit the classified area. Operators and inspectors look for it before energising equipment, so ask the site electrical team what must be supplied with portable and fixed equipment.

Will a handset cope with Pilbara heat and a long roster day?

The target marking is T4 with the ambient range to be fixed on the certificate, which is not yet issued. The 4,000 mAh battery is sized for a roster day with radio, camera and GNSS running. Check the certified range against your site's worst summer ambient and trial a unit before fleet orders.

Enquiry · Australia

Ask about the IS-04Z1 for Australia

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · Australia

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Australia?

Name the site and the operator and we will send what is available before launch.