Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Canada · industrial

Industrial Cell Phone Supplier in Canada

The IS-04Z1 is an Ex phone for people working inside classified areas at Canadian oil sands plants, gas plants, refineries and offshore platforms. Buyers searching for an industrial cell phone supplier for Canada can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Canada, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicindustrial
DeviceCell Phone
RouteSupply
WhereCanada

Short answer. An industrial cell phone for Canada cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · industrial

Checklist: industrial cell phone for Canada

Checks a reviewer should make, with the IS-04Z1 position
CheckWhat to look forIS-04Z1 today
Ingress protectionIP rating for dust and waterIP68 design
Fleet managementEMM and MDM supportAndroid 16 with EMM and MDM
Explosion protectionA separate certificate and markingIn progress; not issued
Where it appliesCanada: Sarnia Chemical Valley, Kitimat and the north coast, Athabasca oil sandsClassified by the site operator
Product · Canada

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Canada. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Canada

Hazardous-area industry in Canada

The main operators, industrial areas and sites that the SAMS Canada market guide covers.

Operators, EPCs and contractors

Suncor Energy
Base Plant, Fort Hills, Sarnia and Edmonton refining
Cenovus Energy
Foster Creek, Christina Lake, Lloydminster, offshore Atlantic
Imperial Oil
Kearl and Cold Lake, Strathcona and Sarnia refineries
Canadian Natural Resources
Horizon and Albian mining, Jackfish and Primrose thermal
Syncrude
Mildred Lake mining and upgrading, operated by Suncor
Shell Canada
Scotford upgrader, refinery and chemicals in the Heartland

Industrial areas and sites

Athabasca oil sands
Fort McMurray mines, upgraders and in situ plants
Cold Lake and the Lakeland
Thermal in situ pads and steam generation
Alberta Industrial Heartland
Fort Saskatchewan, Scotford and Redwater refining and chemicals
Montney and Duvernay
Gas plants around Grande Prairie and Fort St John
Sarnia Chemical Valley
Three refineries and dozens of chemical plants
Kitimat and the north coast
LNG Canada trains and jetty, Cedar LNG building
Field notes · Canada

More about Canada that matters for portable equipment

Canada: rules and approvals

Electrical products for hazardous locations must be certified by a body accredited by the Standards Council of Canada, and IECEx or ATEX certificates are not accepted in place of that certification.

Canada: background

The Great Canadian Oil Sands plant, now part of Suncor, opened in 1967, and Fort McMurray's growth took off as further oil sands plants followed after the 1970s energy crises.

Canada: rules and approvals

Zone approval in Canada uses the CAN/CSA C22.2 No. 60079 series, and an existing IECEx certificate with test reports can shorten the work, because mainly the national differences then have to be addressed.

Canada: geography and layout

Fort McMurray sits in the middle of the Athabasca oil sands, 435 km north-east of Edmonton on Highway 63, surrounded by boreal forest, so access is largely by one road or by air.

The term · industrial

What “industrial” means for a smartphone

“Industrial” describes a phone built for plant conditions: sealed, drop-resistant and manageable at fleet scale through Android Enterprise. It does not by itself mean the phone may enter a classified area. Only a device with a valid explosion-protection certificate and marking may do that.

The IS-04Z1 is designed to be both an industrial Android phone (IP68, 4,000 mAh battery, 50 MP camera, Android 16 with EMM and MDM support) and an intrinsically safe one. Its explosion-protection certificates are in progress and have not been issued.

In Canada. Crews and contractors rotate through remote camps and Sarnia plants, and winter gloves limit handling. Android 16 with EMM and MDM enrolment locks a device to an approved app set and wipes it at demobilisation, with English and French interfaces for Quebec crews. Charging must be done outside the classified area.

The route · supply

Sourcing the IS-04Z1 for Canada

There is no stock to order for Canada yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · Canada

Frequently asked questions

Can we buy an industrial cell phone in Canada today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does an industrial cell phone in Canada cost?

SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.

Is the IS-04Z1 an industrial phone as well as an Ex phone?

Yes by design: IP68 sealing, a 4,000 mAh battery, a 50 MP camera and Android 16 with EMM and MDM support. The explosion-protection certificates are separate and still in progress.

Which sites in Canada does this cover?

The market guide for Canada covers Athabasca oil sands, Cold Lake and the Lakeland, Alberta Industrial Heartland, Montney and Duvernay, among others. Site-level pages are linked below.

How will SAMS supply Canada?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

What radio approval does a smartphone need in Canada?

Devices with Wi-Fi, Bluetooth or cellular radios generally need ISED certification and must meet the applicable Radio Standards Specifications, along with interference limits such as ICES-003. A certification body recognised by ISED can issue it. Confirm the exact requirements for your device with ISED or an accredited body.

Do Canadian sites use Zones or Divisions?

The Canadian Electrical Code now uses Zones in Section 18, while Class and Division rules remain in Annex J for existing installations, so older plants may still be classified by Division. Check the classification drawing for the area and make sure the device marking matches the system used there.

Does the phone carry both Zone and Division markings?

The marking target is II 2 G Ex ib IIC T4, with Class I Division 1 pursued on the same intrinsic safety basis. Nothing has been issued: certification is in progress. Canadian Section 18 classifies by Zone while Annex J18 keeps Division. Check which system your site's drawings use before anything is specified.

Enquiry · Canada

Ask about the IS-04Z1 for Canada

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · Canada

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Canada?

Send the zone and gas group of your site and we will reply with the datasheet and schedule.