Scale
Texas produced about 41 per cent of US crude in 2019 and had 30 refineries holding 31 per cent of US refining capacity in January 2019.
Texas is the largest US crude oil producer, with onshore fields concentrated in the Permian Basin in the west and the historic East Texas field. Zone 1 work arises at wellsites, tank batteries, compressor stations and gas plants. An IECEx smartphone distributor in Texas oil and gas fields would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Texas oil and gas fields has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Texas oil and gas fields: Compressor stations, Gas processing plants, Wellsites and tank batteries | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Texas Oil Fields. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Who operates there and which kinds of classified area a handset would meet, from the SAMS site research.
Texas produced about 41 per cent of US crude in 2019 and had 30 refineries holding 31 per cent of US refining capacity in January 2019.
Drilling shifted west as eastern fields such as East Texas, discovered in 1930, declined. The Permian Basin now dominates onshore output.
In May 2026 operators reported production from 156,120 oil wells and 84,661 gas wells, with statewide crude output averaging about 4.18 million barrels a day.
The Railroad Commission of Texas regulates the oil and gas industry, gas utilities, pipeline safety and LPG safety, and was created by the legislature in 1891.
Texas produced about 41 percent of national crude oil and 25 percent of national natural gas in 2019, and is the largest state producer of both.
As wells in the east of the state depleted, drilling moved westward, and today the busiest activity is in West Texas and under the Gulf of Mexico.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Texas oil and gas fields. Texas producers and their service contractors with overseas operations may already use IECEx records elsewhere. A certificate of conformity and schedule of conditions would be the documents to review. For the IS-04Z1 these are targets, not held certificates, as the product remains pre-launch.
A distributor for Texas oil and gas fields would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
Likely candidates are wellsites and tank batteries, drilling rigs, compressor stations, gas processing plants. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Texas oil and gas fields.
The Railroad Commission of Texas regulates oil and gas production, pipelines and LPG safety, while each operator sets its own electrical safety and equipment rules. For equipment approvals, ask the operator which marks and standards they accept.
US sites commonly use the National Electrical Code, which includes both a Class and Division approach and a Zone approach, and equipment is typically tested by a recognised US laboratory. The operator's area classification is the deciding document.
Classification is site-specific, whatever the field's age. A wellsite, tank battery, compressor station or gas plant each has its own classification and drawings. Compare the IS-04Z1 target marking against each, and ask the operator about permit rules. Certification is still in progress.
More on Texas Oil Fields, and on other places in United States.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.