Japan: rules and approvals
Since a January 2017 notice an IECEx test report can be submitted as the applicant's prior test results, and a certificate is valid for three years.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Japan every shift: refinery and petrochemical-complex operators, LNG terminal crews, inspection engineers, and the HSE and telecoms teams who equip them. Radio equipment falls under the Telec technical conformity scheme of the communications ministry, and a certified-products database can be searched to check a model. Distribution partners for Japan are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Japan has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Certificate of conformity | Number checkable on the IECEx online register | In progress; not issued |
| Standards edition | The IEC 60079 edition the certificate cites | Stated on the certificate when issued |
| Schedule of conditions | Limits of use, batteries and accessories | Published with the certificate |
| Where it applies | Japan: Yokkaichi, Sakai, Kashima | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Japan. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Japan market guide.
Since a January 2017 notice an IECEx test report can be submitted as the applicant's prior test results, and a certificate is valid for three years.
The Port of Nagoya in Ise Bay is described as Japan's largest and busiest trading port, handling about 10% of the country's trade by value, and has been run by the Nagoya Port Authority since 1951.
Small rivers, including the Edo River, supply water to the Keiyo industrial region, and the Port of Chiba serves the zone.
Explosion-protected electrical equipment must pass type examination, called kentei, under Article 44-2 of the Industrial Safety and Health Act, and equipment without the pass mark may not be used.
IECEx is the international scheme for certifying equipment used in explosive atmospheres. A certificate of conformity is issued by an accredited certification body against a specific edition of the IEC 60079 standards and carries a schedule of conditions of safe use. It is not a legal requirement in most countries on its own, but many national schemes accept it as the technical basis.
The IECEx certificate for the IS-04Z1 is in progress and has not been issued. The marking target is Ex ib IIC T4, the intrinsic safety concept for Zone 1 gas with the hardest gas group (IIC) and a 135 °C temperature class.
In Japan. Japan's large complexes at Kashima, Mizushima and Yokkaichi work with global suppliers and contractors who know the IECEx scheme. A certificate of conformity names the equipment, and its schedule of conditions sets the conditions of use. IECEx certification for the IS-04Z1 is in progress, with TIIS also in progress.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Japan yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
No. The IECEx certificate is in progress and has not been issued. SAMS will publish the number when it exists.
The market guide for Japan covers Kashima, Mizushima, Chiba / Sodegaura, Yokkaichi, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Japan.
Radio equipment is covered by the Telec technical conformity scheme, and the certified-products database can be searched to check a model. Requirements depend on the radio technologies in the device, so confirm with a registered certification body before importing.
Since 2017 an IECEx test report can be submitted as the applicant's prior test results, which can reduce testing, but the Japanese type examination certificate is still required, and it is valid for three years. Confirm the reports accepted with the chosen examination body.
The IS-04Z1 has IP68 sealing, which helps with water, dust and salt-laden air. That is an ingress rating only. Ask for the datasheet's operating ranges and test a unit during a humid season round at a coastal site.
Related guides for Japan and for Japan.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.