United Kingdom: industry on the ground
UK crude oil and condensate production had fallen to about 630,000 barrels a day by 2024, so much of the current work is maintenance, life extension and decommissioning of mature installations.
The IS-04Z1 is an intrinsically safe Android smartphone designed for Zone 1 and Zone 21 work, from a North Sea deck to a gas governor kiosk at the end of a street. Buyers searching for a hazardous area smartphone supplier for United Kingdom can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. A hazardous area smartphone for United Kingdom cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | United Kingdom: Fawley, Stanlow, Aberdeen | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in United Kingdom. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS United Kingdom market guide covers.
UK crude oil and condensate production had fallen to about 630,000 barrels a day by 2024, so much of the current work is maintenance, life extension and decommissioning of mature installations.
About 98 per cent of UK oil and gas production comes from offshore fields, and the services industry in Aberdeen has been a leader in offshore technology.
The Dangerous Substances and Explosive Atmospheres Regulations 2002 require employers to identify and classify areas where explosive atmospheres may occur and to avoid ignition sources from unprotected equipment in them.
Since 1 October 2024 CE marking has been recognised in Great Britain without an end date, so ATEX-certified products can be sold there without UKCA, while Northern Ireland still requires CE.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In United Kingdom. UK classified areas fall into two patterns: a few large installations with formal permit systems, offshore and downstream, and inland Zone 1 and Zone 2 work spread thinly across gas networks, water and waste sites staffed by one or two people. The duty holder classifies each area. SAMS does not classify any area.
Nothing can be bought for United Kingdom today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for United Kingdom covers Aberdeen, St Fergus, Sullom Voe, Grangemouth, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
DSEAR places duties on employers to classify areas where explosive atmospheres may occur and to avoid ignition sources from unprotected equipment. A site will therefore expect devices used in classified areas to be suitable for the zone, gas group and temperature class stated in its area classification records.
Yes. Since 1 October 2024 CE marking has been recognised in Great Britain without an end date, so an ATEX-certified product can be sold there without UKCA, although a UKCA route with a UK approved body also exists. Northern Ireland still requires CE. Check the current rules before shipping.
It combines 4G LTE, Wi-Fi and four-constellation GNSS to hold a position and a connection where one network is not enough. Actual coverage depends on the site, so test the unit on your own route before relying on it.
Other guides for United Kingdom, other places in United Kingdom, and the pages behind them.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.