Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Poland · hazardous area

Hazardous Area Smartphone Supplier in Poland

The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, built for the refinery, fertiliser and gas terminal work where Polish teams actually meet an explosive atmosphere. Buyers searching for a hazardous area smartphone supplier for Poland can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Poland, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceSmartphone
RouteSupply
WherePoland

Short answer. A hazardous area smartphone for Poland cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · hazardous area

Checklist: hazardous area smartphone for Poland

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Zone0, 1 or 2 for gas; 20, 21 or 22 for dustDesigned for Zone 1 and Zone 21
Gas groupIIA, IIB or IICIIC (target)
Area drawingThe operator's own classification drawingDecided by the site operator
Where it appliesPoland: Police, Tarnów, PłockClassified by the site operator
Product · Poland

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Poland. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Poland

Hazardous-area industry in Poland

The main operators, industrial areas and sites that the SAMS Poland market guide covers.

Operators, EPCs and contractors

Orlen
Płock and Gdańsk refineries and the Płock petrochemical complex.
Orlen Południe
Biorefining and base oil plants at Trzebinia and Jedlicze.
Anwil
PVC, caustic soda and nitrogen fertilisers at Włocławek.
Grupa Azoty
Nitrogen and chemical plants at Tarnów, Puławy and Police.
Grupa Azoty Polyolefins
The Polimery Police propylene and polypropylene complex.
Gaz-System
Transmission grid, Baltic Pipe and the Świnoujście LNG terminal.

Industrial areas and sites

Płock
The largest refining and petrochemical complex in the country.
Gdańsk
Coastal refinery, oil terminal and pipeline tank farms.
Włocławek
Chlorine, PVC and fertiliser plants on the Vistula.
Puławy
Nitrogen fertiliser and melamine production in Lublin province.
Police
Fertiliser complex and the new polypropylene units on the Oder.
Tarnów
The original Azoty nitrogen and plastics site in Małopolska.
Field notes · Poland

More about Poland that matters for portable equipment

Poland: background

Poland produced 78 megatonnes of hard coal and 57 megatonnes of brown coal in 2009, and a plan agreed in September 2020 aims to phase out coal by 2049.

Poland: industry on the ground

Poland's energy sector is the fifth largest in Europe, with an installed electricity capacity of about 61 GW at the end of 2024, so power plants and mines are large sources of classified areas.

Poland: industry on the ground

In 2020 coal made up 69.5% of national energy production and 68.5% of electricity generation, so coal handling, bunkers and mills create combustible dust zones at many power sites.

Poland: background

PKN Orlen was created in 1999 by merging the state fuel retailer CPN with Petrochemia Płock, the firm running the Płock refineries, and has since grown into a multinational refiner and gas trader.

The term · hazardous area

What “hazardous area” means for a smartphone

A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.

No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.

In Poland. Polish hazardous areas sit in belts: refining and petrochemicals at Płock and Gdańsk, fertilisers and polymers from Włocławek through Puławy and Kędzierzyn-Koźle to Police, and gas infrastructure around Świnoujście and Baltic Pipe. Upper Silesian coal mining is Group I and is not counted in. Operators classify their own areas.

The route · supply

Sourcing the IS-04Z1 for Poland

There is no stock to order for Poland yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · Poland

Frequently asked questions

Can we buy a hazardous area smartphone in Poland today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does a hazardous area smartphone in Poland cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

Which hazardous areas is the IS-04Z1 designed for?

Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.

Which sites in Poland does this cover?

The market guide for Poland covers Płock, Gdańsk, Włocławek, Puławy, among others. Site-level pages are linked below.

How will SAMS supply Poland?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

Where does Poland's combustible dust risk concentrate?

Coal-fired power stations, including large brown coal plants such as Bełchatów, along with coal-using industry, handle bulk fuel that creates dust zones such as Zone 21 and Zone 22. Check that a device's dust group and temperature class match the site classification drawings.

Do Polish coal mines need different equipment from power plants?

ATEX separates Group I equipment for mining from Group II for surface industries, and underground methane and coal dust conditions differ from surface plant. Check the group marking on any device against the area and the mine operator's own approval procedure.

Can the IS-04Z1 be used in Polish coal mines?

No. It is designed as Group II surface equipment, and underground coal mining is Group I, with a separate certificate for methane and coal dust. Do not take a Group II device underground. Refineries, fertiliser plants and gas terminals are the intended areas, subject to the site operator's classification.

Enquiry · Poland

Ask about the IS-04Z1 for Poland

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · Poland

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Poland?

Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.