Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
China · hazardous area

Hazardous Area Smartphone Supplier in China

The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in China every shift: oilfield and refinery operators, coal-mining safety officers, petrochemical engineers, and the HSE and telecoms teams who equip them. This page sets out how a hazardous area smartphone supply route to China will work for the IS-04Z1, and what is and is not available before launch.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for China, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceSmartphone
RouteSupply
WhereChina

Short answer. A hazardous area smartphone for China cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · hazardous area

Checklist: hazardous area smartphone for China

Specification checklist against the IS-04Z1 today
CheckWhat to look forIS-04Z1 today
Zone0, 1 or 2 for gas; 20, 21 or 22 for dustDesigned for Zone 1 and Zone 21
Gas groupIIA, IIB or IICIIC (target)
Area drawingThe operator's own classification drawingDecided by the site operator
Where it appliesChina: Zhoushan / Ningbo, Maoming, ShanxiClassified by the site operator
Product · China

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · China

Where this applies in China

The classified areas, operators and sites below are the ones covered in the SAMS China market guide.

Operators, EPCs and contractors

Sinopec
China Petroleum & Chemical Corporation — refining, petrochemicals and retail nationwide
PetroChina (CNPC)
Upstream oil and gas production and refining
China Energy Investment Corporation
The world’s largest coal producer, formed from Shenhua and Guodian
CNOOC
Offshore oil and gas production
Yanzhou Coal / Yankuang
Major coal mining group in Shandong and beyond
Daqing Oilfield
One of China’s largest and oldest producing oilfields

Industrial areas and sites

Shanxi
China’s largest coal-producing province
Shaanxi and Inner Mongolia
Major coal mining and coal-chemical regions
Daqing
Heilongjiang oilfield, one of the largest in China
Shengli oilfield
Major producing field in Shandong
Zhoushan / Ningbo
Large-scale coastal refining and petrochemical hub
Maoming
Refining and petrochemical complex in Guangdong
Field notes · China

More about China that matters for portable equipment

China: rules and approvals

Explosion-protected electrical products in China need CCC certification, mandatory since 1 October 2020, to the GB/T 3836 series, which is China's adoption of IEC 60079.

China: rules and approvals

ATEX certificates and Eurasian certificates are not accepted in China, and the applicant for CCC may be a foreign company.

China: rules and approvals

CNCA designated six certification bodies and 13 testing laboratories for Ex products, and an IECEx test report may serve as test evidence but does not replace the CCC certificate.

China: background

The Daqing field in Heilongjiang, discovered in 1959 in the Songhua Jiang-Liao basin, has been the backbone of Chinese oil production for decades, and Shengli began producing in 1968.

The term · hazardous area

What “hazardous area” means for a smartphone

A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.

No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.

In China. China's classified areas range from northern coal belt mines in Shanxi, Shaanxi and Inner Mongolia to inland oilfields at Daqing and Shengli and the coastal petrochemical hubs at Zhoushan, Ningbo and Maoming. Operators such as Yanzhou Coal and CNOOC classify their own areas, which SAMS does not.

The route · supply

Sourcing the IS-04Z1 for China

There is no stock to order for China yet. The IS-04Z1 is pre-launch, certification is in progress, and supply will run through authorised distributors after the certificates are issued. Procurement teams can prepare now with the datasheet, the certification schedule and a safe-area evaluation.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · China

Frequently asked questions

Can we buy a hazardous area smartphone in China today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does a hazardous area smartphone in China cost?

No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.

Which hazardous areas is the IS-04Z1 designed for?

Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.

Which sites in China does this cover?

The market guide for China covers Shanxi, Shaanxi and Inner Mongolia, Daqing, Shengli oilfield, among others. Site-level pages are linked below.

How will SAMS supply China?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

What radio and network approvals does a smartphone need in China?

In addition to CCC where applicable, radio devices need SRRC approval and phones connecting to public networks need the MIIT network access licence. The NAL is described as compulsory, valid for three years, with local testing and a local representative. Confirm the current requirements with MIIT or an accredited body.

Do Ex phones need a CCC mark in China?

Products that fall within the explosion-protected electrical category of the CCC catalogue may not be sold, imported or used in business without a CCC certificate and mark, to the GB/T 3836 series. Check with a CNCA-designated body whether a given product falls within that catalogue scope.

Does NEPSI certification mean a Chinese operator will accept the phone?

No: Sinopec, PetroChina and the major coal producers each run their own equipment-approval and procurement process, so a device can be NEPSI-certified and still unlisted. NEPSI and SRRC are being pursued and are not finished. Confirm the listing route with the operator.

Enquiry · China

Ask about the IS-04Z1 for China

Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.

Enquiry · China

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for China?

Send the zone and gas group of your site and we will reply with the datasheet and schedule.