Netherlands: logistics and access
The Nieuwe Waterweg links the Rhine and Meuse to the sea, and the Betuweroute freight railway to Germany opened its Dutch section in 2007, so material and equipment move by ship, barge, rail and road.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refineries, chemical parks and tank terminals between Rotterdam and Geleen. This page sets out how a hazardous area mobile phone supply route to Netherlands will work for the IS-04Z1, and what is and is not available before launch.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. A hazardous area mobile phone for Netherlands cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Netherlands: Moerdijk, Geleen, Pernis | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Netherlands. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Netherlands market guide covers.
The Nieuwe Waterweg links the Rhine and Meuse to the sea, and the Betuweroute freight railway to Germany opened its Dutch section in 2007, so material and equipment move by ship, barge, rail and road.
Two coal-fired power stations at Eemshaven and Maasvlakte are scheduled to close by 2030, and Borssele is the only nuclear power station, producing about 3.3% of electricity used.
The Netherlands had 2,606 wind turbines in December 2020 and targets 70% renewable electricity by 2030, so wind and energy transition projects are a growing part of site work.
The petrochemical industry and general cargo transshipment are the most important activities in the port, and large oil refineries are located west of the city, making it one of Europe's densest hazardous-area clusters.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Netherlands. Dutch classified areas cluster along the water: Pernis, Botlek and Europoort around Rotterdam, the Maasvlakte, Moerdijk, Chemelot at Geleen, Terneuzen, Vlissingen and Nieuwdorp, and the northern chemical park at Delfzijl and Eemshaven. Groningen extraction has ended, so hazard now sits in import, storage, hydrogen and CO2. The site operator classifies each area.
Nothing can be bought for Netherlands today: the IS-04Z1 is pre-launch, and SAMS will supply end users through authorised distributors once certificates exist. What a buyer can do now is take the specification, ask for the written certification schedule and arrange a safe-area evaluation, so that the right local channel contacts you at launch.
The technical specification, marking target and conditions of use, sent by email.
Which certificates are in progress, in what order, and what is still to be confirmed.
Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.
Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Netherlands covers Pernis, Botlek, Europoort, Maasvlakte, among others. Site-level pages are linked below.
Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.
Dutch is the national language, but many Rotterdam terminals work in English because of their international customers. ATEX instructions are typically expected in the language of the destination, so confirm with the site safety office whether English or Dutch documents are required.
The Netherlands is an EU member, so ATEX Directive 2014/34/EU applies to equipment and Directive 1999/92/EC to zoning. Most Rotterdam terminals expect Zone 1 or Zone 2 devices to carry Ex and CE marking. Each concession adds its own registration and permit rules, so check before arrival.
The Warenwetbesluit requires a Dutch-language instruction manual for explosion-safe equipment, so buyers usually ask for it with the marking string. The ATEX programme for the IS-04Z1 is in progress, and documents are not yet issued. Confirm requirements with your site operator and the supplier before purchase.
Related guides for Netherlands and for Netherlands.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Name the site and the operator and we will send what is available before launch.