Chile: rules and approvals
SEC certifies listed electrical products, which must carry the SEC mark, and certificates remain valid while the design is unchanged, though SEC may audit products already on the market.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Chile every shift: copper and lithium plant operators in the Atacama, refinery crews at Concón, and the HSE and telecoms teams who equip them. Mining accounts for about 14 per cent of GDP, or around 20 per cent including linked activity, and about 3 per cent of the workforce works directly in mines and quarries. Distribution partners for Chile are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Chile has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Chile: Salar de Atacama, Collahuasi, Concón | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Chile. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Chile market guide covers.
SEC certifies listed electrical products, which must carry the SEC mark, and certificates remain valid while the design is unchanged, though SEC may audit products already on the market.
Chile's customs service works with SUBTEL and SEC, and non-certified products in mandatory categories can be held at the border, so importers should carry certificates and technical documents.
In 2025 Chile was the world's largest producer of copper, iodine and rhenium, and the third-largest producer of lithium and molybdenum.
Mining is governed by separate bodies including the Chilean Copper Commission, ENAMI, SERNAGEOMIN and the Ministry of Mining, so a mine's safety rules come from the mining regulator as well as electrical law.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Chile. Chile's classified areas are concentrated in the Atacama copper and lithium belt, including Chuquicamata, Escondida, Collahuasi and the Salar de Atacama, with a refining and gas cluster at Concón and Magallanes. Dust, not gas, dominates the north. Operators such as Codelco and ENAP classify their own areas, not SAMS.
SAMS is appointing authorised distributors ahead of the Q4 2026 launch. No territory has been granted for Chile yet and applications are reviewed company by company. Because a certified Ex device cannot be opened by an ordinary phone workshop without invalidating its certificate, SAMS looks for partners who can provide competent technical support and after-sales service locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Chile covers Chuquicamata / Calama, Escondida, Salar de Atacama, Collahuasi, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Chile.
SUBTEL approval is needed for radio and telecom devices before they are imported or sold, normally through a local legal representative and with FCC or CE test reports. SUBTEL does not currently require a specific label. Confirm current requirements with SUBTEL or an agent before shipment.
SEC certification applies to listed electrical products such as power adapters and chargers, which must be tested in a recognised laboratory and carry the SEC mark. Whether your accessories are on the mandatory list should be checked with SEC or an accredited body before import.
Many Atacama sites sit above 3,000 metres with big day-to-night swings and intense UV. The build is designed for that spread and the display for outdoor use, but the certified ambient range is stated only when the certificate issues. Check that range against site extremes and trial a unit.
Related guides for Chile and for Chile.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.