Chile: rules and approvals
The SUBTEL application goes through a local legal representative, FCC or CE test reports are typically accepted, and SUBTEL does not currently mandate a compliance label.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Chile every shift: copper and lithium plant operators in the Atacama, refinery crews at Concón, and the HSE and telecoms teams who equip them. This page explains what to look for in an ATEX and IECEx mobile phone for Chile, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for Chile: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | Chile: Chuquicamata / Calama, Escondida, Salar de Atacama | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Chile. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Chile market guide covers.
The SUBTEL application goes through a local legal representative, FCC or CE test reports are typically accepted, and SUBTEL does not currently mandate a compliance label.
SEC certifies listed electrical products, which must carry the SEC mark, and certificates remain valid while the design is unchanged, though SEC may audit products already on the market.
Mining accounts for about 14 per cent of GDP, or around 20 per cent including linked activity, and about 3 per cent of the workforce works directly in mines and quarries.
Chile's customs service works with SUBTEL and SEC, and non-certified products in mandatory categories can be held at the border, so importers should carry certificates and technical documents.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In Chile. Chilean operators work from an IECEx Certificate of Conformity, so a Codelco, Escondida or SQM reviewer would ask for that first, with SEC conformity marking being pursued alongside. An ATEX certificate beside it helps international mining contractors and EPCs working on the Atacama copper and lithium sites. Certification is in progress.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for Chile covers Chuquicamata / Calama, Escondida, Salar de Atacama, Collahuasi, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
SUBTEL approval is needed for radio and telecom devices before they are imported or sold, normally through a local legal representative and with FCC or CE test reports. SUBTEL does not currently require a specific label. Confirm current requirements with SUBTEL or an agent before shipment.
SEC certification applies to listed electrical products such as power adapters and chargers, which must be tested in a recognised laboratory and carry the SEC mark. Whether your accessories are on the mandatory list should be checked with SEC or an accredited body before import.
Many Atacama sites sit above 3,000 metres with big day-to-night swings and intense UV. The build is designed for that spread and the display for outdoor use, but the certified ambient range is stated only when the certificate issues. Check that range against site extremes and trial a unit.
More on Chile, and on other places in Chile.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Name the site and the operator and we will send what is available before launch.