Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
Belgium · hazardous area

Hazardous Area Cell Phone Supplier in Belgium

The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the chemical belt along the Scheldt, the terminals at Zeebrugge and the platforms in Hainaut. Buyers searching for a hazardous area cell phone supplier for Belgium can take the datasheet and the certification schedule for the IS-04Z1 now; supply follows certification.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for Belgium, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topichazardous area
DeviceCell Phone
RouteSupply
WhereBelgium

Short answer. A hazardous area cell phone for Belgium cannot be bought yet: the SAMS IS-04Z1 is pre-launch (certification in progress, no certificate issued), and the datasheet, certification schedule and safe-area evaluation units are available now.

Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.

At a glance · hazardous area

Checklist: hazardous area cell phone for Belgium

Checks a reviewer should make, with the IS-04Z1 position
CheckWhat to look forIS-04Z1 today
Zone0, 1 or 2 for gas; 20, 21 or 22 for dustDesigned for Zone 1 and Zone 21
Gas groupIIA, IIB or IICIIC (target)
Area drawingThe operator's own classification drawingDecided by the site operator
Where it appliesBelgium: Feluy, Jemeppe-sur-Sambre, Antwerp right bankClassified by the site operator
Product · Belgium

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Belgium. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · Belgium

Where an Ex phone is used in Belgium

Operators and classified areas drawn from the SAMS Belgium market guide.

Operators, EPCs and contractors

BASF Antwerpen
Second largest BASF site in the world, on the right bank.
TotalEnergies
Antwerp refining and petrochemical platform, its largest integrated site in Europe.
ExxonMobil
Antwerp refinery, coker and lubricants production on the Scheldt.
INEOS
Project ONE ethane cracker under construction on the left bank.
Covestro
Polyurethane and polycarbonate production inside the Antwerp cluster.
Borealis
Polyolefin production at Kallo and Beringen.

Industrial areas and sites

Antwerp right bank
The Scheldelaan chemical belt, from BASF to the refineries.
Antwerp left bank
Kallo and Doel, with crackers, polymers and Project ONE.
Zeebrugge
LNG import terminal, jetties and the gas interconnection point.
Ghent canal zone
North Sea Port industry along the canal to Terneuzen.
Feluy
Hainaut petrochemical platform and polymer production.
Jemeppe-sur-Sambre
Chemical site in the Sambre valley near Namur.
Field notes · Belgium

More about Belgium that matters for portable equipment

Belgium: infrastructure

Nuclear power typically supplies 50-60% of domestic electricity, and in 2023 the lives of Doel 4 and Tihange 3 were extended to 2035, so long-running plant maintenance continues alongside the gas network.

Belgium: logistics and access

Belgium imports raw materials and semi-finished goods and re-exports them after processing, with the Port of Antwerp the most notable of its ports, canals, railways and highways.

Belgium: infrastructure

After Groningen gas supply fell, Belgium converted affected customers from low-calorific L-gas to high-calorific H-gas, a programme that began in 2018 and was completed by the end of summer 2024.

Belgium: rules and approvals

Under ATEX, equipment in use before July 2003 can remain in use indefinitely provided a risk assessment shows it is safe, which matters when mixing older and newer devices at long-established plants.

The term · hazardous area

What “hazardous area” means for a smartphone

A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.

No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.

In Belgium. Almost everything classified in Belgium sits inside the Port of Antwerp-Bruges, with LNG import at Zeebrugge, the Ghent canal zone and Walloon platforms at Feluy and Jemeppe-sur-Sambre. Solvent and powder areas can sit inside one fence line. The operators and Seveso inspectors, not SAMS, decide the classification of each area.

The route · supply

Sourcing the IS-04Z1 for Belgium

Supply of the IS-04Z1 to Belgium starts only after certification, through authorised distributors. Until then a buyer can request the datasheet and the written certification schedule, and arrange a safe-area evaluation unit, which puts the site on the list for the right local channel at launch.

  1. 01

    Request the datasheet

    The technical specification, marking target and conditions of use, sent by email.

  2. 02

    Ask for the certification schedule

    Which certificates are in progress, in what order, and what is still to be confirmed.

  3. 03

    Evaluate in a safe area

    Evaluation units can be used for connectivity, MDM enrolment and workflow testing outside classified areas.

  4. 04

    Register for launch

    Tell us the site, zone, gas group and quantity so the right authorised distributor can contact you.

Questions · Belgium

Frequently asked questions

Can we buy a hazardous area cell phone in Belgium today?

Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.

What does a hazardous area cell phone in Belgium cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

Which hazardous areas is the IS-04Z1 designed for?

Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.

Which sites in Belgium does this cover?

The market guide for Belgium covers Antwerp right bank, Antwerp left bank, Zeebrugge, Ghent canal zone, among others. Site-level pages are linked below.

How will SAMS supply Belgium?

Through authorised distributors once certificates exist. Until then SAMS can send the datasheet and certification schedule and arrange safe-area evaluation units.

Can I use older Ex equipment alongside new devices in Belgium?

ATEX allows equipment in use before July 2003 to remain in service if a risk assessment shows it is safe. New purchases need to meet the current Directive. Keep the operator's risk assessment on file and ask whether it has additional internal rules for handheld devices.

Where in Belgium is chemical hazardous-area work concentrated?

The Antwerp port area and Flanders are the best-known concentration, with further industry along the Sillon industriel through Liège and Charleroi. Details of individual plants and zones are held by each operator, so request their layout drawings when planning.

Which language must the instructions be in?

Belgian rules expect information that reaches a worker to be in the language of the region where the work happens: Dutch in Flanders, French in Wallonia, and both in Brussels. The manual, safe-use instructions and declaration of conformity are planned in Dutch and French. Certification is still in progress. Check the wording with your site safety adviser.

Enquiry · Belgium

Ask about the IS-04Z1 for Belgium

Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.

Enquiry · Belgium

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for Belgium?

Name the site and the operator and we will send what is available before launch.