China: rules and approvals
Explosion-protected electrical products in China need CCC certification, mandatory since 1 October 2020, to the GB/T 3836 series, which is China's adoption of IEC 60079.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in China every shift: oilfield and refinery operators, coal-mining safety officers, petrochemical engineers, and the HSE and telecoms teams who equip them. This page explains what to look for in a hazardous area cell phone for China, and where the IS-04Z1 stands against that list today.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for China: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | China: Shanxi, Shaanxi and Inner Mongolia, Daqing | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS China market guide covers.
Explosion-protected electrical products in China need CCC certification, mandatory since 1 October 2020, to the GB/T 3836 series, which is China's adoption of IEC 60079.
ATEX certificates and Eurasian certificates are not accepted in China, and the applicant for CCC may be a foreign company.
CNCA designated six certification bodies and 13 testing laboratories for Ex products, and an IECEx test report may serve as test evidence but does not replace the CCC certificate.
The Daqing field in Heilongjiang, discovered in 1959 in the Songhua Jiang-Liao basin, has been the backbone of Chinese oil production for decades, and Shengli began producing in 1968.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In China. China's classified areas range from northern coal belt mines in Shanxi, Shaanxi and Inner Mongolia to inland oilfields at Daqing and Shengli and the coastal petrochemical hubs at Zhoushan, Ningbo and Maoming. Operators such as Yanzhou Coal and CNOOC classify their own areas, which SAMS does not.
A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for China covers Shanxi, Shaanxi and Inner Mongolia, Daqing, Shengli oilfield, among others. Site-level pages are linked below.
Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.
In addition to CCC where applicable, radio devices need SRRC approval and phones connecting to public networks need the MIIT network access licence. The NAL is described as compulsory, valid for three years, with local testing and a local representative. Confirm the current requirements with MIIT or an accredited body.
Products that fall within the explosion-protected electrical category of the CCC catalogue may not be sold, imported or used in business without a CCC certificate and mark, to the GB/T 3836 series. Check with a CNCA-designated body whether a given product falls within that catalogue scope.
No: Sinopec, PetroChina and the major coal producers each run their own equipment-approval and procurement process, so a device can be NEPSI-certified and still unlisted. NEPSI and SRRC are being pursued and are not finished. Confirm the listing route with the operator.
Other guides for China, other places in China, and the pages behind them.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.