China: rules and approvals
ATEX certificates and Eurasian certificates are not accepted in China, and the applicant for CCC may be a foreign company.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in China every shift: oilfield and refinery operators, coal-mining safety officers, petrochemical engineers, and the HSE and telecoms teams who equip them. China's land-based oil resources are mostly in the north, with large fields at Daqing, Shengli, Liaohe, Karamay and Dagang, so cold-climate and arid-climate sites are both common. An ATEX and IECEx mobile phone distributor in China would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. China has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Where things stand: the IS-04Z1 has not launched, and none of its four certification routes has produced a certificate yet. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Marking | II 2 G Ex ib IIC T4 on the rating plate | Design target; not yet marked |
| EU-type examination certificate | Notified body number and certificate ID | In progress with TÜV; not issued |
| IECEx certificate of conformity | Number listed on the IECEx online register | In progress; not issued |
| Where it applies | China: Daqing, Shengli oilfield, Zhoushan / Ningbo | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS China market guide covers.
ATEX certificates and Eurasian certificates are not accepted in China, and the applicant for CCC may be a foreign company.
CNCA designated six certification bodies and 13 testing laboratories for Ex products, and an IECEx test report may serve as test evidence but does not replace the CCC certificate.
The Daqing field in Heilongjiang, discovered in 1959 in the Songhua Jiang-Liao basin, has been the backbone of Chinese oil production for decades, and Shengli began producing in 1968.
The current implementing rule is CNCA-C23-01:2024, in force since 1 May 2024, and certification has been to the 2021 editions of GB/T 3836 since 1 May 2022.
ATEX is the European legal framework for equipment used in explosive atmospheres (Directive 2014/34/EU). IECEx is the international certification scheme built on the IEC 60079 standards. Buyers outside Europe often ask for both: an IECEx certificate is the technical evidence most national regimes build on, while ATEX is the legal route into the European market.
For the IS-04Z1 both routes are in progress with TÜV in Germany and neither certificate has been issued. The marking target is II 2 G Ex ib IIC T4: equipment Group II (surface industry), Category 2 (Zone 1 gas), protection concept ib (intrinsic safety), gas group IIC and temperature class T4.
In China. In China NEPSI is the Ex certification authority, and the technical evidence behind it is typically aligned with an IECEx Certificate of Conformity, so a reviewer at Sinopec or PetroChina would ask for the NEPSI certificate first. An IECEx and ATEX dual route helps foreign contractors on petrochemical projects. All certification is in progress.
A distributor for China would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Not yet. Both routes are in progress with TÜV in Germany and no certificate has been issued. Any listing that says otherwise is wrong.
The market guide for China covers Shanxi, Shaanxi and Inner Mongolia, Daqing, Shengli oilfield, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for China.
In addition to CCC where applicable, radio devices need SRRC approval and phones connecting to public networks need the MIIT network access licence. The NAL is described as compulsory, valid for three years, with local testing and a local representative. Confirm the current requirements with MIIT or an accredited body.
Products that fall within the explosion-protected electrical category of the CCC catalogue may not be sold, imported or used in business without a CCC certificate and mark, to the GB/T 3836 series. Check with a CNCA-designated body whether a given product falls within that catalogue scope.
No: Sinopec, PetroChina and the major coal producers each run their own equipment-approval and procurement process, so a device can be NEPSI-certified and still unlisted. NEPSI and SRRC are being pursued and are not finished. Confirm the listing route with the operator.
More on China, and on other places in China.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.