Netherlands: infrastructure
In 2020, 64.2% of Dutch power came from gas-fired thermal stations, and the last of fourteen gas power stations was commissioned in 2013, so gas plant maintenance is a recurring workload.
The IS-04Z1 is an intrinsically safe Android handset designed for Zone 1 and Zone 21, aimed at the refineries, chemical parks and tank terminals between Rotterdam and Geleen. Two coal-fired power stations at Eemshaven and Maasvlakte are scheduled to close by 2030, and Borssele is the only nuclear power station, producing about 3.3% of electricity used. A hazardous area cell phone distributor in Netherlands would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Netherlands has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Netherlands: Europoort, Maasvlakte, Moerdijk | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Netherlands. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Netherlands market guide covers.
In 2020, 64.2% of Dutch power came from gas-fired thermal stations, and the last of fourteen gas power stations was commissioned in 2013, so gas plant maintenance is a recurring workload.
The Port of Rotterdam is Europe's largest seaport, covering 105 square kilometres over about 40 km, from the historic harbours through Botlek and Europoort to the reclaimed Maasvlakte on the North Sea.
The port of Amsterdam handled 63 million tonnes of cargo in 2023, is the second largest port in the Netherlands, and comprises 620 hectares of waterways and 1,995 hectares of land along the North Sea Canal.
The Nieuwe Waterweg links the Rhine and Meuse to the sea, and the Betuweroute freight railway to Germany opened its Dutch section in 2007, so material and equipment move by ship, barge, rail and road.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Netherlands. Dutch classified areas cluster along the water: Pernis, Botlek and Europoort around Rotterdam, the Maasvlakte, Moerdijk, Chemelot at Geleen, Terneuzen, Vlissingen and Nieuwdorp, and the northern chemical park at Delfzijl and Eemshaven. Groningen extraction has ended, so hazard now sits in import, storage, hydrogen and CO2. The site operator classifies each area.
A distributor for Netherlands would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Netherlands covers Pernis, Botlek, Europoort, Maasvlakte, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Netherlands.
The Rhine-Meuse delta coast is windy and often wet, so check the water ingress rating, glove-friendly touch and cold-temperature battery performance. Terminals have separate induction processes, so plan device registration with each concession's HSE team in advance.
Petrochemical and refinery sites are concentrated at Botlek and Europoort and in the area west of the city, with further bulk terminals at Maasvlakte. Exact classifications are held by each concession holder, so request the zoning drawings for your terminal.
Camera policy is a site decision. Android 16 with EMM and MDM allows the camera, location services and apps to be restricted centrally, which lets a telecoms team show what is permitted. Hold the evidence for the site's security and HSE teams before bringing any device through the gate.
More on Netherlands, and on other places in Netherlands.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.