Japan: rules and approvals
As of July 2026 the Ministry of Health, Labour and Welfare lists eight registered examination bodies for this equipment, including TIIS and several bodies outside Japan.
The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in Japan every shift: refinery and petrochemical-complex operators, LNG terminal crews, inspection engineers, and the HSE and telecoms teams who equip them. The type examination involves a sample for structural inspection, with no factory audit in law, and the applicant can be a Japanese or foreign manufacturer or an importer. Distribution partners for Japan are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Japan has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
For the record, no certificate exists for the IS-04Z1 today. The programme is under way ahead of a Q4 2026 launch. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Zone | 0, 1 or 2 for gas; 20, 21 or 22 for dust | Designed for Zone 1 and Zone 21 |
| Gas group | IIA, IIB or IIC | IIC (target) |
| Area drawing | The operator's own classification drawing | Decided by the site operator |
| Where it applies | Japan: Chiba / Sodegaura, Yokkaichi, Sakai | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Japan. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
Operators and classified areas drawn from the SAMS Japan market guide.
As of July 2026 the Ministry of Health, Labour and Welfare lists eight registered examination bodies for this equipment, including TIIS and several bodies outside Japan.
Since a January 2017 notice an IECEx test report can be submitted as the applicant's prior test results, and a certificate is valid for three years.
The Port of Nagoya in Ise Bay is described as Japan's largest and busiest trading port, handling about 10% of the country's trade by value, and has been run by the Nagoya Port Authority since 1951.
Radio equipment falls under the Telec technical conformity scheme of the communications ministry, and a certified-products database can be searched to check a model.
A hazardous area is a place where flammable gas, vapour or combustible dust may be present. Standards divide these into zones: Zones 0, 1 and 2 for gas and vapour, and Zones 20, 21 and 22 for dust. Zone 1 and Zone 21 are the tier where an explosive atmosphere is likely to occur in normal operation, which is where the IS-04Z1 is designed to work. Anything carried in must be marked for the zone, gas group and temperature class of the area.
No certificate has been issued for the IS-04Z1 yet, so it must not be taken into a classified area until the certificate covering it exists and the site operator has accepted it.
In Japan. Japanese classified areas include refining and petrochemical complexes at Kashima, Mizushima, Chiba and Sodegaura, Yokkaichi and Sakai, plus LNG and thermal power assets. The operator classifies each area, not SAMS. The IS-04Z1 is designed for Zone 1 and Zone 21, in gas and dust areas.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Japan. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
Zone 1 and Zone 21 (gas and dust) with gas group IIC and temperature class T4, subject to certification. It must not be used in a classified area before its certificate is issued and the site has accepted it.
The market guide for Japan covers Kashima, Mizushima, Chiba / Sodegaura, Yokkaichi, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Japan.
Radio equipment is covered by the Telec technical conformity scheme, and the certified-products database can be searched to check a model. Requirements depend on the radio technologies in the device, so confirm with a registered certification body before importing.
Since 2017 an IECEx test report can be submitted as the applicant's prior test results, which can reduce testing, but the Japanese type examination certificate is still required, and it is valid for three years. Confirm the reports accepted with the chosen examination body.
The IS-04Z1 has IP68 sealing, which helps with water, dust and salt-laden air. That is an ingress rating only. Ask for the datasheet's operating ranges and test a unit during a humid season round at a coastal site.
More on Japan, and on other places in Japan.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.