Skip to content
Certification In Progress · Launching Q4 2026 Become a Distributor
Certification In Progress · Launching Q4 2026 Product Certifications Industries Blog About Contact Become a Distributor
China · explosion proof

Explosion-Proof Smartphone in China

The IS-04Z1 is an intrinsically safe handset for people who cross into classified areas in China every shift: oilfield and refinery operators, coal-mining safety officers, petrochemical engineers, and the HSE and telecoms teams who equip them. If you are specifying an explosion proof smartphone for China, this page covers the markings, the approvals and the current certification status of the IS-04Z1.

Pre-launch · certification in progress · Launching Q4 2026

SAMS IS-04Z1 intrinsically safe smartphone for China, front view
Marking targetEx ib IIC T4Intrinsic safety, Zone 1 / 21 design target · certification in progress
AvailabilityQ4 2026via authorised distributors
Search topicexplosion proof
DeviceSmartphone
RouteSpecification
WhereChina

Short answer. The SAMS IS-04Z1 is the intrinsically safe smartphone covered here for China: pre-launch, designed for Zone 1 and Zone 21 (marking target Ex ib IIC T4), with certification in progress and no certificate issued.

Current position: certification in progress, nothing issued, launch targeted for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.

At a glance · explosion proof

Checklist: explosion proof smartphone for China

What to check, and where the IS-04Z1 stands today
CheckWhat to look forIS-04Z1 today
Protection conceptFlameproof (Ex d) or intrinsic safety (Ex i)Intrinsic safety, level ib
Zone suitabilityZone 1 gas and Zone 21 dustDesign target for Zone 1 and 21
CertificateNumber, issuing body and schedule of conditionsIn progress; not issued
Where it appliesChina: Shanxi, Shaanxi and Inner Mongolia, DaqingClassified by the site operator
Product · China

The product behind this search: the SAMS IS-04Z1.

SAMS IS-04Z1 explosion proof mobile phone, front view

SAMS IS-04Z1

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in China. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.

  • IP68 sealed
  • 4,000 mAh battery
  • 50 MP camera
  • Android 16
  • Zone 1 / Zone 21 design target
The market · China

Hazardous-area industry in China

The main operators, industrial areas and sites that the SAMS China market guide covers.

Operators, EPCs and contractors

Sinopec
China Petroleum & Chemical Corporation — refining, petrochemicals and retail nationwide
PetroChina (CNPC)
Upstream oil and gas production and refining
China Energy Investment Corporation
The world’s largest coal producer, formed from Shenhua and Guodian
CNOOC
Offshore oil and gas production
Yanzhou Coal / Yankuang
Major coal mining group in Shandong and beyond
Daqing Oilfield
One of China’s largest and oldest producing oilfields

Industrial areas and sites

Shanxi
China’s largest coal-producing province
Shaanxi and Inner Mongolia
Major coal mining and coal-chemical regions
Daqing
Heilongjiang oilfield, one of the largest in China
Shengli oilfield
Major producing field in Shandong
Zhoushan / Ningbo
Large-scale coastal refining and petrochemical hub
Maoming
Refining and petrochemical complex in Guangdong
Field notes · China

More about China that matters for portable equipment

China: geography and layout

China's land-based oil resources are mostly in the north, with large fields at Daqing, Shengli, Liaohe, Karamay and Dagang, so cold-climate and arid-climate sites are both common.

China: rules and approvals

The current implementing rule is CNCA-C23-01:2024, in force since 1 May 2024, and certification has been to the 2021 editions of GB/T 3836 since 1 May 2022.

China: rules and approvals

GB 3836.15-2024 on design, selection and erection and GB 3836.16-2024 on inspection and maintenance took effect as mandatory national standards on 1 August 2025, governing installations rather than product certification.

China: rules and approvals

Phones also need the MIIT network access licence (NAL) and SRRC radio approval; the NAL is described as compulsory, valid for three years, with local testing and a local representative required.

The term · explosion proof

What “explosion proof” means for a smartphone

“Explosion proof” is the phrase most buyers use for equipment that may be taken into a classified hazardous area. Strictly, it covers several protection concepts: a flameproof enclosure (Ex d) contains an internal explosion, while intrinsic safety (Ex i) limits electrical energy so that an ignition cannot start. Phones are normally intrinsically safe, because a flameproof handset would be too heavy to carry all shift.

The IS-04Z1 uses intrinsic safety, with a marking target of Ex ib IIC T4, and is designed for Zone 1 and Zone 21. It is pre-launch, certification is in progress and no certificate has been issued.

In China. Explosion proof is the everyday phrase, but a coal mine and a coastal petrochemical plant need different thinking. Flameproof Ex d suits much fixed mining equipment; the IS-04Z1 uses intrinsic safety to limit energy in a handheld. It is designed for Zone 1 gas and Zone 21 dust, not underground classification. Operators classify areas, not SAMS.

The route · specification

Specifying an explosion proof smartphone for China

A short checklist for anyone writing or reviewing the specification, with the IS-04Z1 status against each point.

Check on the paper

Marking
Equipment group, category, protection concept, gas group and temperature class, matched to the area drawing.
Certificate and schedule
A certificate number, issuing body and the schedule of conditions, not a brochure claim.
Standards edition
The IEC 60079 or national standard edition the certificate was issued against.

Check for the IS-04Z1

Marking target
II 2 G Ex ib IIC T4: a target, not yet a certificate.
Certificate status
IECEx, ATEX, UKEX and NEC 500 in progress; none issued.
Operator approval
Separate from the certificate and handled with the site operator.
Questions · China

Frequently asked questions

Can we buy an explosion proof smartphone in China today?

No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.

What does an explosion proof smartphone in China cost?

There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.

Is the IS-04Z1 explosion proof or intrinsically safe?

It is intrinsically safe (marking target Ex ib IIC T4), which is the usual way to make a phone for hazardous areas. It is not a flameproof (Ex d) design, and certification is still in progress.

Which sites in China does this cover?

The market guide for China covers Shanxi, Shaanxi and Inner Mongolia, Daqing, Shengli oilfield, among others. Site-level pages are linked below.

Is intrinsically safe the same as explosion proof?

Not exactly. Explosion proof is a broad everyday term; intrinsic safety is one protection concept, which limits energy so ignition cannot occur. Flameproof (Ex d) is a different concept that contains an explosion. The IS-04Z1 is intrinsically safe by design.

What climate range should devices handle in northern Chinese oilfields?

Fields such as Daqing in the north-east have cold winters, while Karamay and other north-western fields are arid, so a wide operating temperature range and dust ingress protection are sensible. Confirm site limits with the operator before deployment.

Can IECEx or ATEX certificates be used in China?

An IECEx test report is reported as recognised as test evidence, but it does not replace the CCC certificate, and ATEX certificates are not accepted. Plan a separate CCC programme with a designated body, using the IECEx test work to reduce duplication where permitted.

Is the phone suitable for underground coal mines?

The design covers Zone 1 gas and Zone 21 dust together, matching the combined methane and coal dust exposure, but certification is in progress and no certificate exists. Underground mining is a distinct classification regime, so a mine operator would need to confirm suitability. Check requirements with the mine safety authority.

Enquiry · China

Ask about the IS-04Z1 for China

Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.

Enquiry · China

Please enter your name.
Please enter your company name.
Enter a valid email address.
Please enter your target market.
Please select one.

Launching Q4 2026

Planning for China?

Name the site and the operator and we will send what is available before launch.