Port-led logistics
Tanjung Perak is the main port for eastern Java, so imported equipment normally arrives by sea.
Surabaya is the capital of East Java and home to Tanjung Perak, Indonesia's second-largest port. The Surabaya Industrial Estate Rungkut and neighbouring Gresik, with a fertiliser plant and cement works, hold the chemical, fuel and process areas where Zone 1 and Zone 21 equipment applies. Distribution partners for Surabaya and the Gresik industrial area are being identified ahead of the Q4 2026 launch of the IS-04Z1.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Surabaya and the Gresik industrial area has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Status: pre-launch. IECEx, ATEX, UKEX and NEC 500 certification is in progress and no certificate has been issued; launch is planned for Q4 2026. A buyer's engineering review is separate from the certificate. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Surabaya and the Gresik industrial area: Cement plant dust areas, Industrial estate chemical plants, Port fuel and chemical handling | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Surabaya. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The companies on site and the hazardous-area types a handset is likely to meet there.
Tanjung Perak is the main port for eastern Java, so imported equipment normally arrives by sea.
SIER was founded in 1974 and covers about 245 hectares with around 300 companies; the JIIPE estate and port in Gresik is a further 3,000-hectare development by Pelindo and AKR.
Juanda International Airport, about 12 km from central Surabaya in Sidoarjo, is Indonesia's third busiest airport and served around 500 aircraft a day in 2019, with Batik Air and Citilink using it as a hub.
Satellite cities of Mojokerto, Gresik, Sidoarjo, Bangkalan and Lamongan form the wider metropolitan area, which is where much heavier industry and port-side plants are found around the city.
The Port of Tanjung Perak in north Surabaya is Indonesia's second-busiest seaport, on a site where a modern port facility was first built in 1910, giving contractors a major sea gateway to eastern Indonesia.
The city hosts a large shipyard and several naval schools, and in the Dutch colonial era hosted the most extensive naval base in the colony, so marine and ship-repair work is a core local activity.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Surabaya and the Gresik industrial area. A marking check around Surabaya would separate gas areas, such as port fuel and chemical plants, from dust areas, such as the cement plant, listed as Zone 21 in the sheet. The IS-04Z1 target marking, II 2 G Ex ib IIC T4, is gas only and unapproved.
A distributor for Surabaya and the Gresik industrial area would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
No. Nothing can be bought or taken into a classified area today: certification is in progress and launch is planned for Q4 2026. What is available now is the datasheet, the written certification schedule and evaluation units for safe-area use.
SAMS has not published a price. Any figure you are offered for an uncertified Ex phone should be treated with caution; written indicative pricing is available for a defined quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
Likely candidates are port fuel and chemical handling, fertiliser and chemical plants, cement plant dust areas, industrial estate chemical plants. Which areas are classified, and to what zone, is set by the site operator's own area classification drawings.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Surabaya and the Gresik industrial area.
Temperatures are steady, around 23 to 31 degrees, but the wet season from October to May brings heavy rain and humidity, and coastal air adds salt. Devices typically need good ingress protection and cleaning routines for exposed use.
The wider metropolitan area includes Gresik, Sidoarjo and other satellite cities with port-side and industrial plants. Typical hazards include fuel, chemical and bulk handling, so ask each operator for its zone classification and device approval requirements.
Yes in practice. Gresik lies about 25 kilometres north-west of Surabaya, and its fertiliser and cement works are major buyers of safety equipment. Requirements are set plant by plant. Confirm with each site operator's safety function.
Related guides for Surabaya and for Indonesia.
Send the site, zone and gas group and roughly how many handsets. We reply by email with the datasheet and the certification schedule.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.