Saudi Arabia: infrastructure
The Ju'aymah Gas Plant at Ras Tanura is recognised as the world's largest natural gas liquids fractionation plant.
The IS-04Z1 is a Zone 1 and Zone 21 handset for people who work inside classified areas in the Kingdom: field operators, maintenance and inspection engineers, and the HSE and telecoms teams who equip them. Ras Tanura Refinery was established in 1939 and is the largest refinery in Saudi Arabia, run by Saudi Aramco. An Ex-proof cell phone distributor in Saudi Arabia would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Saudi Arabia has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. Operator approval runs on its own timeline. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Saudi Arabia: Ghawar, Shaybah, Khurais | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Saudi Arabia. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The main operators, industrial areas and sites that the SAMS Saudi Arabia market guide covers.
The Ju'aymah Gas Plant at Ras Tanura is recognised as the world's largest natural gas liquids fractionation plant.
The Communications, Space and Technology Commission issues type approval certificates valid for two years, with no local representative required; Saudi Standards, Metrology and Quality Organization safety certification needs a local representative.
Jubail Industrial City was designated in 1975 and is home to SABIC, while Jubail has a population of about 475,000 as of 2022.
Ras Tanura is served by King Fahd International Airport in Dammam and a private Aramco airport, and a two-lane road joins the Dhahran to Jubail Highway, with a bridge to Safwa.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Saudi Arabia. A Saudi marking check would read II 2 G Ex ib IIC T4 and then test the temperature class against the ambient range, since open plant in the Eastern Province sits above 45 °C for months. The gas group must also suit the process, while sulphur and grain handling put Zone 21 beside Zone 1 at some sites.
Distribution of the IS-04Z1 is by authorised partners only, and SAMS has not yet granted a territory for Saudi Arabia. Each application is reviewed on its merits. Because opening a certified Ex handset in an ordinary workshop invalidates its certificate, the partner must be able to support and service the device locally.
Not today. Until the certificates are issued the IS-04Z1 stays out of classified areas, and until launch there is nothing to purchase. You can ask for the datasheet and the certification schedule, or book a safe-area evaluation unit.
No price is published. While certification is in progress there is no list price and no committed lead time, and a supplier quoting a firm figure for an uncertified Ex handset is promising something it cannot stand behind. Indicative pre-launch pricing is issued in writing against a stated quantity and site.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Saudi Arabia covers Abqaiq, Ras Tanura, Ghawar, Shaybah, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Saudi Arabia.
King Fahd International Airport in Dammam serves Ras Tanura and the wider Eastern Province, and the Dhahran to Jubail Highway links the main coastal sites, so most visits start from Dammam with road transfers arranged by the host.
The Communications, Space and Technology Commission issues a type approval valid for two years, and Saudi Standards, Metrology and Quality Organization certification applies for safety and conformity. SASO needs a local representative. Confirm current requirements per model.
The design targets heat, humidity and dust with a rugged build and IP68 sealing. The T4 target and the certified ambient range are what matter, and they will be published with the datasheet and certificate. Confirm both against the highest ambient temperature at your plant before specifying.
Other guides for Saudi Arabia, other places in Saudi Arabia, and the pages behind them.
Tell us what you need to equip and where. The SAMS team answers by email with the datasheet and where each certification route stands.
Send the zone and gas group of your site and we will reply with the datasheet and schedule.