Mexico: rules and approvals
Mexico has two approval schemes, telecom homologation and NOM certification, and neither is mandatory for every product; which applies depends on what is being sold.
The IS-04Z1 is an Ex mobile phone for people working inside classified areas at Mexican refineries, offshore platforms, petrochemical plants and fuel terminals. Telecom and wireless products follow the PEC conformity assessment procedure, which results in a Certificate of Homologation, so older IFT references in supplier paperwork may be out of date. An Ex-proof cell phone distributor in Mexico would carry the IS-04Z1 to these buyers once certification completes.
Pre-launch · certification in progress · Launching Q4 2026
Short answer. Mexico has no appointed SAMS distributor yet: the IS-04Z1 is pre-launch (certification in progress, no certificate issued, launch planned for Q4 2026), and distributor applications are open.
Current position: certification in progress, nothing issued, launch targeted for Q4 2026. An operator's own vendor approval is a separate step. Certification status. Place facts reviewed October 2026.
| Check | What to look for | IS-04Z1 today |
|---|---|---|
| Ex marking | Group, category, protection concept, gas group, temperature class | II 2 G Ex ib IIC T4 (target) |
| Gas group | IIA, IIB or IIC matched to the area drawing | IIC (target) |
| Temperature class | T-class below the ignition temperature of the gas | T4, 135 °C (target) |
| Where it applies | Mexico: Ciudad del Carmen, Coatzacoalcos and Minatitlán, Altamira, Tamaulipas | Classified by the site operator |

An intrinsically safe Android smartphone designed for Zone 1 and Zone 21 hazardous areas in Mexico. It is pre-launch: IECEx, ATEX and NEC 500 certification is in progress ahead of the Q4 2026 launch.
The classified areas, operators and sites below are the ones covered in the SAMS Mexico market guide.
Mexico has two approval schemes, telecom homologation and NOM certification, and neither is mandatory for every product; which applies depends on what is being sold.
Oil was first refined into kerosene around 1876 near Tampico, and Pemex's Tula refinery in Hidalgo is among its major inland refining sites.
NOM certificates of conformity, issued by bodies such as NYCE and ANCE, allow customs clearance into Mexico, and the Secretaria de Economia oversees NOM enforcement.
The offshore Cantarell field was discovered in 1976, started production in 1979 and peaked in 2004, so ageing offshore infrastructure is a feature of Mexican upstream work.
“Ex-proof” is shorthand for equipment carrying an explosion-protection marking (the Ex mark) that matches the area it enters. The marking states the protection concept, gas or dust group and temperature class, and it must be backed by a certificate issued by a recognised body, so a phone described as Ex-proof should come with a certificate number you can check.
The IS-04Z1 is designed to carry the marking II 2 G Ex ib IIC T4. That is a target: certification is in progress, no certificate has been issued, and SAMS will publish the certificate numbers when they exist.
In Mexico. NOM-001-SEDE follows the American structure, so a Mexican drawing may read Clase I División 1 where an international one reads Zone 1. A marking check therefore compares II 2 G Ex ib IIC T4 with whichever language the plant drawings use. The IIC group covers the hydrogen and ethylene found on Gulf coast units, and T4 should be confirmed.
A distributor for Mexico would carry the IS-04Z1 after certification completes; the Q4 2026 launch is the planning date and no appointment has been made. SAMS reviews applicants one by one and prefers companies with their own Ex-competent technical and service staff, since certified devices must not be repaired outside approved channels.
Not yet. The IS-04Z1 is pre-launch and its certification is still in progress ahead of a Q4 2026 launch. No unit goes into a classified area before the certificate covering it exists. The datasheet, the certification schedule and safe-area evaluation units are available now.
There is no list price yet. SAMS gives indicative pre-launch pricing in writing, against a stated quantity and site, and does not commit to a lead time before certification completes.
The marking target is II 2 G Ex ib IIC T4. It becomes a marking only when the certificate is issued; until then it is a design target.
The market guide for Mexico covers Dos Bocas, Tabasco, Bay of Campeche, Ciudad del Carmen, Coatzacoalcos and Minatitlán, among others. Site-level pages are linked below.
Apply through the distributor page with your company details and the territory you cover. SAMS reviews applications company by company and has not yet granted a territory for Mexico.
Following the 2025 changes, the Comision Reguladora de Telecomunicaciones within the Agencia de Transformacion Digital y Telecomunicaciones issues Certificates of Homologation, replacing the IFT. Check the current procedures with the CRT or an accredited body, as supplier documents may still cite IFT.
Gulf coast and offshore sites typically combine heat, high humidity, salt air and seasonal storms, so check ingress protection, corrosion resistance and operating temperature range. Confirm platform transfer rules, such as helicopter battery restrictions, with the operator before deployment.
Radio equipment needs homologación separately from hazardous area approval, and that step is in progress alongside the explosion protection programme. No approval has been granted yet. Check with the site and your telecoms team which documents they will require before any device is enrolled.
More on Mexico, and on other places in Mexico.
Share the site details and quantity. You will get the datasheet and the certification schedule back by email; pricing is indicative only until launch.
Tell us the zone, gas group and operator. We will send the datasheet and the certification schedule.